Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateTrusted Gate Repair for Fort Lauderdale Homeowners
Gate repair in Fort Lauderdale typically runs $165 to $480 for most mechanical and electrical fixes, with same-day service available for urgent failures. Calder Gate Repair Fort Lauderdale has been handling gates across Broward County since 2009, and our technicians arrive background-checked, in uniform, with a trackable arrival time. If your gate won’t open, needs Hinge & Post Repair, or makes a grinding noise, call (754) 354-2542 and a live person answers, day or night. We quote a written price before any work starts, so the number you agree to is the number on the invoice.
Driveway Gate Repair
Driveway gate repair covers the gate that controls vehicle access to your property, from a single swing panel to a rolling cantilever. In Fort Lauderdale, driveway gates take a beating from salt air, afternoon thunderstorms, and daily open-close cycles that homeowners often underestimate. Calder Gate Repair Fort Lauderdale handles the full mechanical chain: hinges, wheels, tracks, opener motors, safety sensors, and the control boards that tie it all together, including expert Gate Realignment. Most driveway gate repairs run $185 to $430 before any parts, and every job starts with a written price agreed at the door.
Hinge and Post Work
Worn hinges let a gate drag, bind, or sag, and in Fort Lauderdale’s humidity, rust accelerates the damage. Our technicians assess the post anchors and hinge barrels, then rebuild or replace what’s failing rather than just greasing it.
Opener Integration
A driveway gate that moves fine by hand but won’t respond to the remote usually points to the opener’s limit switches or receiver board. We test the full signal path and replace only what’s actually dead.
Styles & brands we work with
Gate Welding
Gate welding repairs cracked frames, broken pickets, failed hinge brackets, and stress fractures that develop over years of wind load and vehicle vibration. On Fort Lauderdale properties near the Intracoastal or ocean, salt corrosion eats welds faster than inland, and a cracked weld left alone turns into a full structural failure. Calder Gate Repair Fort Lauderdale performs mobile welding on site, so you don’t have to uninstall and transport a heavy gate. Typical gate welding jobs run $150 to $500, with a written quote before the torch comes out.
Structural Crack Repair
When a steel or iron gate frame cracks, grinding back to clean metal and running a proper bead restores strength. We then coat the repaired area to match and protect against further corrosion.
Bracket and Hinge Reinforcement
A hinge bracket that tears away from the frame needs real plate reinforcement, not just another bead on top of a failing weld. We cut out the fatigue zone and weld in a stronger plate.
Commercial Gate Repair
Commercial gate repair services gates on apartment complexes, HOA entrances, parking garages, and industrial properties across Fort Lauderdale. These gates run more cycles in a week than a residential gate sees in a month, and downtime means angry tenants, security gaps, and code violations. Calder Gate Repair Fort Lauderdale works on slide gates, barrier arms, swing gates, and the access control systems that drive them, including DoorKing and Elite commercial operators, with full Lock Repair services. Commercial repairs typically start at $250 and go up based on the operator type and parts needed, always with a written price first.
Access Control and Keypad Trouble
When residents can’t get in because a keypad or telephone entry system won’t release the gate, the problem often sits in the wiring, the relay, or the operator’s input board. We diagnose from the control panel outward so you don’t replace a working operator because of a bad sensor.
Operator and Motor Failure
Commercial operators are built for heavy use but not for zero maintenance. We replace worn gears, failed capacitors, and burned contactors, and we keep the gate balanced so the motor isn’t doing extra work.
Iron Gate Repair
Iron gate repair restores the strength and appearance of ornamental and functional iron gates that have rusted, bent, or broken over the years. Fort Lauderdale’s salt-laden air is unforgiving on iron, and gates within a mile of the beach rust through faster than those in inland Plantation or Cooper City. Calder Gate Repair Fort Lauderdale straightens bent bars, welds cracked joints, replaces rotted bottom rails, and treats rust before it spreads. Budget $175 to $450 for typical iron gate repair, quoted in writing before we begin.
Rust Treatment and Structural Restoration
Surface rust is cosmetic, but rust that blooms at weld joints and rail ends means the metal is thinning. We grind out the rot, weld in new material where needed, and coat the area to slow future corrosion.
Picketing and Scrollwork Repair
Loose pickets and broken scrollwork are usually a few good welds and a paint match away. We secure every loose element so the gate is safe and solid, not just visually patched.
Sliding Gate Repair
Sliding gate repair fixes cantilever and track-guided gates that drag, jump the rail, or refuse to move entirely. In Fort Lauderdale, debris from storms, shifting soil, and worn roller assemblies are the usual culprits. Calder Gate Repair Fort Lauderdale levels and re-seats gates, replaces rollers and guide rollers, repairs or replaces track sections, and adjusts the opener’s force and limit settings so the gate moves without strain. Most sliding gate repairs run $190 to $450, and you’ll see the written price before we touch a single bolt.
Track and Roller Service
A sliding gate that grinds or shudders usually has worn rollers or a track that’s out of alignment. We replace the roller assemblies and shim the track so the gate rolls freely instead of fighting itself.
Cantilever Balance Correction
Cantilever gates carry their weight on a pair of rear trucks inside the frame. When those bearings wear, the gate sags and the front wheel digs in. We rebuild the truck assemblies to restore true travel.
Wrought Iron Gate Repair
Wrought iron gate repair focuses on the decorative, handcrafted style of gate common in Fort Lauderdale’s older neighborhoods like Victoria Park and Rio Vista. These gates are beautiful but they’re also uniquely vulnerable to rust at every joint and scroll, especially with coastal humidity. Calder Gate Repair Fort Lauderdale preserves the original look while restoring structural integrity: we straighten twisted bars, weld broken ribs, replace corroded sections with matching material, and repaint to blend. Expect to spend $180 to $475 depending on how much rust and fatigue has set in.
Joint and Scroll Reinforcement
The tight scrolls and narrow joints on wrought iron are rust magnets. We clean those areas down to bare metal, weld any cracks, and seal them so the next repair isn’t six months away.
Paint Matching and Protection
After any structural weld, the repaired area needs coating. We match the existing finish and apply a protective layer that holds up to Fort Lauderdale’s sun and salt.
Metal Gate Repair
Metal gate repair is the broad category covering steel, aluminum, and mixed-metal gates that have failed mechanically or structurally. Aluminum gates corrode less than steel but they crack at welds and bend more easily, while steel gates rust but hold their shape longer. In Fort Lauderdale, we see both, often on the same property. Calder Gate Repair Fort Lauderdale assesses the metal type, the failure point, and the opener’s condition, then gives you a written price. Typical metal gate repairs run $165 to $420 depending on materials and labor.
Aluminum Gate Straightening
Aluminum dents and bows when a car bumps it or a hurricane gust hits hard. We straighten what’s viable and replace what’s compromised, keeping the gate square and the opener running true.
Steel Gate Rust Repair
Steel rusts from the inside out, and by the time you see bubbling paint, the damage is deeper than it looks. We cut out the weak sections, weld in fresh steel, and protect the repair properly.
Wood Gate Repair
Wood gate repair addresses sagging, rotting, and split timbers on wooden driveway or pedestrian gates throughout Fort Lauderdale. Wood gates are less common on newer properties but they’re still everywhere in neighborhoods like Sailboat Bend and Shady Banks, and the humidity plus termite pressure takes a toll. Calder Gate Repair Fort Lauderdale replaces rotted rails and pickets, reinforces corners, re-hangs hinges, and adjusts the gate so it latches securely. Plan on $165 to $400 for most wood gate repairs, quoted before any work begins.
Post and Frame Reconstruction
When the post is solid but the frame rails are spongy, we rebuild the frame with treated stock and re-mount the existing pickets. The gate ends up square and strong instead of patched and weakened.
Hinge Reset and Latch Repair
A wood gate that drags on the ground is usually a hinge problem, not just a heavy gate. We reset or upsize the hinges, fix the latch alignment, and the gate closes like it should.
See the difference
Before
After
Before
After
Before
AfterBrands We Service
Ghost Controls openers are common on Fort Lauderdale residential driveway gates, and we know their control boards, limit settings, and the sensor troubleshooting that keeps them working. DoorKing and Elite dominate the commercial and HOA side, and our technicians have pulled apart enough DoorKing slide operators and Elite barrier arms to diagnose them quickly without a parts cannon approach. Mighty Mule units show up everywhere from small driveway swings to pedestrian gates, and we stock the common replacement parts including control boards and remotes.
Whether you have a Mighty Mule that won’t respond or a DoorKing that’s stuck halfway open, the diagnostic approach is the same: test the input path, confirm the board’s output, and replace only what’s actually failed. You get a written price for the specific repair, not a vague “we’ll see what it costs” conversation after the fact.
Signs You Need a Pro Right Now
- Gate won’t open or close fully. A gate that stops mid-travel is usually fighting a failed limit switch or a physical obstruction. Forcing it to continue with the opener will burn out the motor.
- Grinding, squealing, or banging sounds. Metal-on-metal noise means a roller, bearing, or hinge has lost its lubrication or its structure. The longer it runs like that, the more expensive the rebuild.
- Gate sags or scrapes the ground. Sagging says the hinges, post, or frame have weakened. If you can see daylight between the hinge and the post, the gate is pulling away and the repair is smaller today than it will be next month.
- Remote or keypad not working consistently. Intermittent signal issues are often the control board or receiver starting to die. A fresh battery sometimes masks the problem, but the underlying fault doesn’t fix itself.
- Gate reverses or stops for no reason. False detections from safety sensors or a misadjusted force setting wear out the opener and frustrate every driver. We trace the sensor path and correct the cause rather than disabling safety features.
Our Process, Step by Step
- 1
Call and talk to a person. You call (754) 354-2542 and describe what’s happening. A live dispatcher books your appointment and gives you a trackable arrival window, not a four-hour block of waiting.
- 2
On-site diagnosis. The technician arrives in uniform, introduces themselves, and tests the gate, opener, sensors, and control board. We use multimeters, force gauges, and signal testers to find the actual fault rather than guessing.
- 3
Written price before work. You get a printed or digital quote showing parts, labor, and the total. You approve it before anything gets touched, and that number is what you pay.
- 4
The repair, done right. We complete the repair using OEM or equivalent parts from the brand you own, then test the full cycle multiple times to confirm the fix holds.
- 5
Digital invoice and 365-Day Done Right Promise. Before we leave, you receive a digital invoice you can pay from a link. Every repair carries the 365-Day Done Right Promise in writing: if it fails within a year, Calder returns and fixes it at no charge.
How Much Does Gate Repair Cost in Fort Lauderdale?
A typical gate repair in Fort Lauderdale runs between $165 and $480 depending on what’s failed and which brand you own. Simple fixes like a limit switch adjustment or remote reprogramming sit at the lower end, while full hinge replacement, track repair, or control board replacement push higher. Gate welding jobs usually start around $150 and go up with the size of the repair. Commercial operator work starts higher because those systems are more complex and parts cost more.
What moves the price: the age and brand of your opener, whether parts are stock or need ordering, and how much corrosion has set into the frame or hinges. Homes within a mile of the beach consistently pay more for corrosion-related work because the salt does real damage over time. The best way to avoid overpaying is to get a written price before any work starts, which is exactly how Calder Gate Repair Fort Lauderdale operates. Every estimate includes the diagnosis, the plan, and the number, all in writing, and the estimate is free.
Our Service Area Near Fort Lauderdale
We serve properties across Broward County, including Gate Repair in Pompano Beach, Gate Repair in Sunrise, and surrounding communities like Wilton Manors, Oakland Park, Dania Beach, Hallandale Beach, Margate, Cooper City, West Park, Lighthouse Point, and Broadview Park. Most Fort Lauderdale addresses see a technician same day, and emergency calls are answered around the clock. See our home page for the full scope of what we handle.
Serving Fort Lauderdale, FL - Our Local Coverage Area
We’re based in the Fort Lauderdale area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
Frequently Asked Questions About Gate Repair in Fort Lauderdale
Gate repair is the process of diagnosing and fixing any mechanical, electrical, or structural problem that prevents a gate from opening, closing, or staying secure. In Fort Lauderdale that means everything from hinge replacement and track service to opener board diagnostics and weld repairs. Calder Gate Repair Fort Lauderdale handles all of it, from routine fixes to Automatic Gate Repair, and every repair comes with a written price first and the 365-Day Done Right Promise.
Most residential gate repairs in Fort Lauderdale are completed in one to three hours on site. If parts need to be ordered, we’ll tell you before we start and schedule the return visit. You’ll know the timeline before any work begins, not after.
Expect to pay $165 to $480 for most residential gate repairs depending on what’s failed. The diagnosis and estimate are free, and the written price you approve is the price you pay. Call (754) 354-2542 for an exact quote on your specific gate.
Yes. Our technicians work on Mighty Mule, DoorKing, Ghost Controls, Elite, and the other major brands on a daily basis. We know the boards, the sensors, and the common failure points on each brand, so diagnostics are faster and parts are right.
Emergency calls are answered 24/7 by a live person, never a voicemail. If your gate is stuck open or won’t secure, call (754) 354-2542 and we’ll dispatch a technician as quickly as possible. Same-day service is available for urgent failures.
Every repair carries the 365-Day Done Right Promise in writing. If the repair fails within 365 days, Calder Gate Repair Fort Lauderdale returns and fixes it at no charge. That’s a free second visit, not a pro-rated credit or a deductible.
Clear the area around the gate of vehicles, bikes, and plant debris so the technician can work safely. If you have the remote and any access codes, have them nearby. That’s it, our technician handles the rest, including cleanup.
Schedule Your Gate Repair Service in Fort Lauderdale Today
Your gate is a moving structure that keeps people in and keeps people out. When it fails, call (754) 354-2542. You’ll get a live person, a real arrival time, and a written price before any work starts. Calder Gate Repair Fort Lauderdale has served Broward County since 2009, and every repair is backed by the 365-Day Done Right Promise.
Written by Nico Alvarez, Owner at Calder Gate Repair Fort Lauderdale, serving Fort Lauderdale since 2009.