Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateStyles & brands we work with
See the difference
Before
After
Before
After
Before
AfterHow Much Does Gate Parts & Welding Cost in Fort Lauderdale?
Gate parts and welding in Fort Lauderdale typically run between $85 and $750 for most jobs, with the average homeowner spending around $320. Small fixes like hinge replacements or minor bracket welding land on the low end, while full gate frame rebuilds and custom steel fabrication push toward $1,200 to $2,500. The price you’ll pay depends on material, rust damage, and whether the gate needs to come off its hinges to weld properly.
If your gate is sagging, cracked at a weld point, or swinging loose after a storm, this guide covers what parts and welding actually cost in Fort Lauderdale in 2026, what drives those prices up, and what Calder Gate Repair charges before a single bead is laid.
Gate Parts & Welding Cost Breakdown (2026)
Here’s what we see across Fort Lauderdale neighborhoods like Victoria Park, Rio Vista, Coral Ridge, and Plantation when homeowners need gate parts and welding work. These ranges reflect our 2026 pricing and what reputable local shops typically charge:
| Job | Typical Cost Range | What’s Included |
|---|---|---|
| Hinge replacement (pair) | $85 – $220 | New heavy-duty hinges, removal of old hardware, alignment |
| Weld repair, single crack | $120 – $280 | Prep, grind, weld, and touch-up paint |
| Weld repair, multiple cracks or full joint rebuild | $250 – $550 | Structural reinforcement, gusset plates if needed |
| Gate frame straightening (sagging gate) | $200 – $600 | Diagonal brace or tension rod installation plus welding |
| Bracket replacement and welding | $110 – $310 | New steel bracket, welded in place, hardware included |
| Custom steel fabrication (gate insert, panel, or reinforcement) | $350 – $1,200 | Custom cutting, fitting, welding, and finish work |
| Full gate rebuild (large double gates) | $900 – $2,500 | Frame rebuild, new hinges, welding, paint/touch-up |
| Service call (diagnostic only, credited toward repair) | $65 – $95 | On-site assessment, written quote |
Most single-visit welding repairs in Fort Lauderdale fall between $150 and $400. When we quote, you get a written price before any work starts, so the number on the invoice matches the number we agreed to at the door.
Gate parts and welding in Fort Lauderdale covers everything from gate opener brackets to full steel gate rebuilds. The cost shifts based on the condition of the metal, the gate’s weight, and whether we need to remove the gate panel to weld on both sides.
What’s Typically Included in a Welding Repair Quote
Our welding quotes include the labor, welding consumables (rod or wire), grinding and prep work, reinforcement plates where needed, and a protective finish coat on the repaired area. If we need to remove and rehang the gate, that’s line-itemed separately so you see exactly what you’re paying for.
What Affects Gate Parts & Welding Pricing in Fort Lauderdale
Gate pricing isn’t a mystery, but it does vary. Here are the factors that move the number up or down in our market specifically:
- Salt air and rust damage. Fort Lauderdale sits miles from the ocean, and the salt-laden air accelerates corrosion on steel and iron gates. A gate with surface rust is a straightforward weld. A gate with rust-through means we’re cutting out sections and fabricating replacement steel, which costs more. In neighborhoods like Harbor Beach and Las Olas Isles, where ocean exposure is more intense, we see heavier pitting and more frequent structural failures.
- Gate weight and size. A lightweight aluminum pedestrian gate costs less to repair than a 400-pound steel driveway gate. Larger gates need support work while welding, sometimes requiring the gate to come off its hinges entirely.
- Wrought iron vs. aluminum vs. steel. Wrought iron and carbon steel weld easily with standard MIG or stick setups. Aluminum requires different equipment and filler material, which can add 20 to 40 percent to the labor portion. Many Fort Lauderdale homes built in the 1980s and 1990s used aluminum gates, and repairing them correctly takes a welder who works with aluminum regularly.
- Access to the gate. If the gate is in a tight alley or behind landscaping, setup takes longer. Some Coral Ridge and Colee Hammock properties have gates with limited clearance on one side, which means more time positioning equipment and sometimes welding in awkward positions.
- Opener and bracket integration. Gate openers from brands like LiftMaster, FAAC, and BFT mount to specific brackets that need precise alignment. If we’re repairing a weld near the opener bracket, we account for realigning the opener after the repair so the gate cycles smoothly.
- Permit and code requirements. Most welding repairs don’t trigger permit requirements in Fort Lauderdale, but if the gate is part of a new installation or significant structural modification, the city may require a permit. We’ll tell you if your specific job needs one before we start.
Common Gate Parts We Replace in Fort Lauderdale
Welding often goes hand-in-hand with part replacement. Here are the parts we stock and install most often, with realistic local pricing:
- Gate hinges: Heavy-duty ball-bearing hinges run $45 to $85 each. Weld-on hinges cost $30 to $60 each plus installation. Over time, salt corrosion seizes cheap hinges, and the gate starts dragging.
- Weld-on brackets for openers: $25 to $55 per bracket. Brands like Mighty Mule and Ghost Controls sell replacement brackets, but we sometimes fabricate stronger steel versions on-site for $60 to $110 when the factory bracket has failed twice.
- Gate wheels and rollers: $20 to $70 each. Cantilever gates and slide gates rely on rollers that wear down, especially when debris builds up in the track. In Fort Lauderdale’s rainy season, track debris is a constant issue.
- Drop rods and cane bolts: $15 to $45 per rod. These hold double gates in place. A bent drop rod from a storm or an accidental vehicle bump is a quick fix, but the alignment matters more than most people expect.
- Push bars and latches: $35 to $120 depending on material. Solar-powered gate openers from Mighty Mule and Ghost Controls often pair with a basic latch that rusts quickly near the coast. We replace these often.
How to Save on Gate Parts & Welding
You don’t need to overspend to get a gate that works. Here’s what actually helps:
- Catch cracks early. A hairline crack at a hinge or bracket weld is a $120 to $280 fix. Let it go six months and that same crack becomes a full joint rebuild at $400 to $600. We see this constantly in Fort Lauderdale, where humidity accelerates rust once the protective coating is breached.
- Ask for a written quote before the work starts. Calder Gate Repair provides a written price before any work begins, always. You’ll know the exact cost of the weld, the parts, and the labor before we touch the gate. No verbal estimates that change at the door.
- Group repairs into one visit. If your gate needs two welds, a new hinge, and a bracket, doing it all in one trip costs less than scheduling three separate visits. We’ll often discount the service-call fee when multiple repairs are combined.
- Consider reinforcement over replacement. A sagging gate doesn’t always need a new frame. Adding a diagonal brace and re-welding the corner joints costs $250 to $450 and can add another five to eight years of life. A full gate replacement runs $1,800 to $5,000.
- Maintain the finish. After we weld, the repaired area gets a protective coating. But the rest of the gate still needs attention. Touch-up paint once a year, especially within three miles of the ocean, prevents the rust that leads to more welding down the road.
For an exact quote, call Calder Gate Repair Fort Lauderdale at (754) 354-2542. Estimates are free, and we’ll give you a written price before any work starts.
What’s the Difference Between Repair Welding and Fabrication?
Two different jobs, two different price ranges. Repair welding means fixing what’s already there: a cracked weld, a broken bracket, a separated joint. It usually costs $120 to $400 and takes under two hours on-site.
Fabrication means building something new: a custom gate insert, a reinforcement plate, a new steel frame section. Fabrication jobs start around $350 and can run past $1,200 depending on the size and complexity. We template the piece, cut and shape the steel in our shop or on-site, weld it in place, and finish it to match the existing gate.
Gate Welding Safety: Why This Isn’t a DIY Job
Welding involves high heat, electrical current, and molten metal. The danger is real. Our techs are trained on proper ventilation, fire safety, and structural load calculations. If a gate spring or a heavy gate panel is under tension, the release can cause serious injury. We’ve seen homeowner welding attempts fail at the exact spot they tried to fix, because the underlying issue, whether it’s rust, alignment, or improper material choice, wasn’t addressed. If you have a crack, call a professional. It’s faster, safer, and typically cheaper than fixing a botched repair.
Gate Brands We Work With in Fort Lauderdale
Our technicians are factory-familiar with nine major opener brands, which matters when welding and parts work touches the opener itself. A bracket alignment for a LiftMaster is different from a FAAC or a BFT. A Viking opener needs its own mounting geometry. When the gate and opener work together, the weld position has to be precise or the opener strains and fails early.
Our team handles parts and welding for gates paired with LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule openers. That covers virtually every opener a Fort Lauderdale homeowner is likely to own.
How Long Does Gate Welding Take?
Most single-crack weld repairs take 45 to 90 minutes on-site, plus prep and finish work. A hinge replacement with welding runs one to two hours. Full gate rebuilds and custom fabrication can take half a day or longer. When you book, we give you a live, trackable arrival time, not a four-hour window. You’ll know when the tech is on the way, and when the job is done, you’ll get before-and-after photos and a digital invoice you can pay from a link.
FAQs – Gate Parts & Welding Cost
How much does it cost to weld a gate in Fort Lauderdale?
Weld repairs in Fort Lauderdale typically cost between $120 and $550. A single crack runs $120 to $280, while a full joint rebuild or multi-crack repair with reinforcement lands between $250 and $550. Call (754) 354-2542 for a free estimate, and you’ll get a written price before any work starts.
Is it cheaper to repair or replace a gate?
Repairing almost always beats replacing. A sagging gate with cracked welds can be reinforced and re-welded for $250 to $600. Replacing the same gate runs $1,800 to $5,000 or more for a custom-size driveway gate. Replacement only makes financial sense when the frame is rusted through in multiple locations or the gate has been hit by a vehicle and bent beyond straightening. We’ll give you an honest assessment, not an upsell.
How much do gate hinges cost to replace?
Gate hinge replacement in Fort Lauderdale costs $85 to $220 for a pair, including the new hinges, removal of the old ones, and alignment. Weld-on hinges cost $30 to $60 each in parts, plus installation labor. Ball-bearing hinges last longer near the coast and typically run $45 to $85 per hinge. Call (754) 354-2542 to get a firm quote.
Can you fix a rusted gate in Fort Lauderdale’s climate?
Yes, but the approach depends on severity. Surface rust gets ground down, treated, and finish-coated after welding. Structural rust requires cutting out the compromised section and welding in fresh steel. Salt air near the ocean means we always apply a protective finish to repaired areas, and we recommend annual touch-up paint for gates within three miles of the coastline. Most rust repairs cost $150 to $500 depending on how far the corrosion has spread.
Can you come today for a gate welding repair?
In most cases, yes. Calder Gate Repair Fort Lauderdale answers calls with a live person 24/7, and we offer same-day and next-day appointments for gate parts and welding jobs. When you call (754) 354-2542, a real human books your visit and gives you a trackable arrival time. Emergency repairs, like a gate that won’t close and leaves your property unsecured, get priority scheduling.
Why Fort Lauderdale Homeowners Call Calder Gate Repair
Calder Gate Repair is the dedicated gate repair specialist inside the Relay Home Co. family, founded in 2009. Our location in Fort Lauderdale is independently owned and operated under The Relay Visibility Guarantee, which means every job comes with three non-negotiables: a written price before any work starts, a written guarantee on every repair, and a free second visit if the repair fails within the 365-Day Done Right Promise window.
Nico Alvarez leads our Fort Lauderdale team. Every technician is background-checked and arrives in uniform. We don’t do vague four-hour windows. You get a live arrival time you can track from your phone, before-and-after photos, and an invoice you pay from a link. That’s The Relay Standard, and it’s built into every job we do.
Whether you’re in Rio Vista with a rusted wrought-iron pedestrian gate, or in Plantation with a double driveway gate that’s sagging at the center weld, we’ll give you a straight answer on cost and fix it right the first time.
Get Your Free Gate Parts & Welding Estimate
Ready for a firm number? Call Calder Gate Repair Fort Lauderdale at (754) 354-2542. A live person answers, day or night, and we’ll schedule a time that works with your calendar. You’ll get a written quote before any work begins, and if the repair isn’t right, we return at no charge under our 365-Day Done Right Promise. No surprises, no phone tag, no vague estimates. Just a gate that works.
Pricing reflects the Fort Lauderdale market as of 2026. Calder Gate Repair Fort Lauderdale offers free estimates – call (754) 354-2542. Written by Nico Alvarez, Owner at Calder Gate Repair Fort Lauderdale, serving the Fort Lauderdale area since 2009.
What Our Customers Say
"Quote came in the app before the visit. No surprise at the end."
- Ginny L."Safety sensors realigned. Works fine. Photo eyes were dirty and out of line. Gate now stops when it should."
- Raul A."Slide gate wheels replaced. Glides smoothly now."
- Mark T.