Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in Broadview Park, FL
Gate repair in Broadview Park comes down to one thing: this is unincorporated Broward County, and a lot of driveway gates were never built to code in the first place. Calder Gate Repair handles the reality of Broadview Park daily – 1950s-to-1970s homes on bigger lots, gates added informally over the years, and South Florida weather working against every hinge and opener. We’re the gate specialist inside the Relay Home Co. family, and we show up with a written price before any work starts. Call (754) 354-2542 and a live person answers, day or night.
Why Broadview Park Homes Are Different
Broadview Park’s housing stock is mostly single-family homes from the 1950s through the 1970s, set on larger lots than you’ll find in newer subdivisions to the east. Those lots often came with chain-link driveway gates added decades ago, or aluminum gates bolted onto concrete without a permit or an engineer’s input. The result is what our techs see every week: posts set too shallow for the wind load, opener brackets welded on at odd angles, and gate leaves that were never balanced for the weight they actually carry.
The climate does not help. The intense South Florida sun bakes plastic gears and control boards inside opener housings until they crack. Summer rain and hurricane-season salt air rust steel hinges and tracks from the inside out. After any tropical storm warning, call volume in Broadview Park spikes with gates stuck half-open – the manual release was never tested, and corrosion seized the clutch. We carry corrosion-resistant hardware as standard, and we reinforce hurricane-strapped retrofits so the gate stays put when the next storm pushes through.
Styles & brands we work with
Our Main Broadview Park Services
Broadview Park homeowners typically call us for two things: a gate that won’t open or close properly, and an opener that quit responding. Each service has its own dedicated page below.
Gate Repair in Broadview Park
We handle sagging gates, rusted hinges, bent tracks, and gates that scrape the driveway. In Broadview Park, a lot of repairs start with the same root cause: the gate was hung without enough post depth or bracing for a hurricane’s wind load. We inspect the post, the hinges, and the gate leaf as a system, then fix what is actually failing. Most jobs are quoted and completed the same visit, with a written guarantee on the repair. Learn more on our Gate Repair in Broadview Park page.
Electric Gate Repair in Broadview Park
Electric gate problems in Broadview Park usually trace back to wiring that has cooked in the sun, connectors corroded by salt air, or a control board that gave out after one too many power surges. We diagnose the full circuit – from the breaker to the opener to the safety edges – rather than guessing. We also check the battery backup, because a gate that dies when the power blinks during a storm is useless when you need it most. See the full breakdown at Electric Gate Repair in Broadview Park.
Gate Opener Repair in Broadview Park
If the motor runs but the gate barely moves, or you hear the opener hum and nothing happens, that is an opener job. In Broadview Park, the plastic drive gears inside openers are notorious for stripping after years of direct sun heat cycling. We work on nine major opener brands daily, so we usually identify the failed part in the first fifteen minutes on site. Every opener repair carries the 365-Day Done Right Promise. Details are on the Gate Opener Repair in Broadview Park page.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Broadview Park
Calder Gate Repair is factory-familiar with nine major opener brands: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. We stock common parts for Ghost Controls, DoorKing, Elite, and Mighty Mule locally, which means most Broadview Park opener repairs do not wait on a parts shipment. See our brands for the full list.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in Broadview Park, FL
| Service | Typical range in Broadview Park |
|---|---|
| Gate opener repair (motor/gearbox) | $180 – $340 before parts |
| Control board replacement | $250 – $450 |
| Electric gate service call + diagnostic | $85 – $150 (waived with repair) |
| Chain or belt replacement | $30 – $80 |
| Limit switch adjustment | $90 – $150 |
| Hinge replacement (per hinge) | $40 – $90 |
| Track realignment | $110 – $210 |
| Gate post reinforcement | $150 – $400 |
| Battery backup installation | $200 – $350 |
| Keypad installation | $120 – $220 |
| Loop detector repair | $150 – $300 |
| Full gate opener replacement | $650 – $1,400 depending on brand and gate size |
What pushes a Broadview Park price higher: gates that were installed without proper post depth (requiring reinforcement), corrosion damage on multiple hinges or tracks, and openers mounted in full sun that need heat-shielded housing added. Whatever the number, you get it in writing before we touch a bolt – the figure we quote is the figure you pay. No surprises at the door, no add-ons after the fact.
Neighborhoods We Serve in Broadview Park
Broadview Park is compact but varied, and we cover all of it. Homes near State Road 7 tend to be older with more informal gate installations, while lots off Davie Road are seeing more replacement gates on newer concrete driveways.
- Broadview Park North (near NW 8th Street)
- Central Broadview Park (off Davie Road)
- South Broadview Park (near I-595)
- Area near Broadview Elementary
- Lots along SR-7 / NW 441
Response time across Broadview Park is typically same-day for repair calls placed before midday, because crews are dispatched from the Miami (South FL) metro office and route locally.
Service Area – Cities Near Broadview Park
Beyond Broadview Park, Calder Gate Repair covers neighboring Broward communities with the same written-price promise. If you’re in Fort Lauderdale, FL, Pompano Beach, FL, Sunrise, FL, or Margate, FL, a live person answers 24/7 and can route a technician to your area.
Serving Broadview Park, FL - Our Local Coverage Area
We’re based in the Broadview Park area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Broadview Park
Yes. We cover every part of Broadview Park, from homes near SR-7 to the residential streets off Davie Road and down toward I-595. Same-day repair is usually available when you call before midday. The written price applies everywhere in the area.
Most repairs – hinges, tracks, openers, control boards – do not require a permit. Replacement gates or significant post work may fall under Broward County’s unincorporated-area rules, and we’ll flag that before you commit to anything. The quote you approve is the quote you pay.
Yes, and this is one of our most common Broadview Park calls after tropical weather. A gate stuck half-open is a security issue and often a seized manual-release clutch from salt air corrosion. Call (754) 354-2542 and a live person gets you scheduled – we do not send you to voicemail.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Broadview Park Customers Say
"Quote came in the app before the visit. No surprise at the end."
- Ginny L."Safety sensors realigned. Works fine. Photo eyes were dirty and out of line. Gate now stops when it should."
- Raul A."Slide gate wheels replaced. Glides smoothly now."
- Mark T.