A Calder company - serving Fort Lauderdale, FL

Mighty Mule Keypad & Intercom Repair Nationwide

Wrought ironWrought iron
Wood & steel frameWood & steel frame
Farm & ranchFarm & ranch
Sliding driveway gatesSliding driveway gates
LiftMaster operatorsLiftMaster operators
Every visit starts with

Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted

The assessment is free and the quote is the invoice.

Get your free estimate

Mighty Mule Keypad & Intercom Repair: The Fort Lauderdale Owner’s Guide

Mighty Mule keypad and intercom repair in Fort Lauderdale typically runs $185 to $420 installed, depending on whether we’re replacing the keypad, the intercom module, or both. We stock Mighty Mule-compatible keypads and intercom boards on our trucks, so most jobs are done same-day, usually within 90 minutes of diagnosis. The way owners discover this failure is almost always the same: the gate works fine from the remote but won’t respond to the keypad, or the intercom crackles, drops calls, or stops ringing the house phone entirely. One part of the system dies while the rest keeps working, and it takes a trained eye to pinpoint which board or pad actually failed before any money changes hands.

Call (754) 354-2542

Which Mighty Mule Models This Applies To

This repair path covers the Mighty Mule keypad and intercom systems found on the MM260, MM360, MM371, MM571, and the newer MMK371 keypad lineup. The keypad compatibility gotcha that trips up Fort Lauderdale owners is the frequency range: older Mighty Mule systems run on 318 MHz, while many newer units moved to 433 MHz. A keypad bought for the wrong frequency will pair once and then drop out within a week, which is exactly the kind of “mystery failure” that wastes a weekend. We pull the part number off the back of your existing keypad or the control board label before ordering anything, because Mighty Mule changed connector styles between revisions of the MM series, and the wrong revision simply won’t seat into the board.

On the OEM versus aftermarket question, we’re honest about the tradeoffs. Mighty Mule OEM keypads are weather-sealed better for Florida humidity and salt air, which matters within a few miles of the coast. Quality aftermarket units from brands like NorthStar and GTO-compatible lines cost 30 to 40 percent less, and we’ve had good results with them inland, but we tell every Fort Lauderdale customer the same thing: if your gate faces east toward the Intracoastal or sits within two miles of the beach, spend the extra money on OEM. Salt corrosion is the number one keypad killer we see out here, and a cheaper board just becomes a repeat repair six months later.

Explore

Styles & brands we work with

Wrought iron
Wrought iron
Wood & steel frame
Wood & steel frame
Farm & ranch
Farm & ranch
Sliding driveway gates
Sliding driveway gates
LiftMaster operators
LiftMaster operators

Signs Your Mighty Mule Keypad & Intercom Repair Is Failing

  • Keypad lights up but the gate won’t move. That usually means the keypad is transmitting fine but the control board isn’t receiving the frequency it expects. We see this most often after a power surge or a lightning storm rolls through Fort Lauderdale.
  • Some buttons work, others don’t. That’s a worn membrane or corroded contact pad under the keypad face. Florida humidity works its way into the keypad housing over two or three summers, and individual keys start dropping out one by one.
  • Intercom rings but audio is dead or heavily distorted. This points to a failing intercom board or a corroded wire run between the keypad and the house unit. Humid, salty air accelerates this, even on units installed under a cover.
  • The keypad beeps on every press but never accepts the code. That’s a symptom of a memory chip that has lost its programming after a power event. Re-flashing the code sometimes works, but repeat failures mean the board is done.
  • Water or condensation visible behind the keypad lens. That isn’t a “wait and see” situation. Once moisture is inside the housing, corrosion has already started on the circuit traces, and failure is a matter of weeks, not months.

Replacement Cost & What’s Included

For Mighty Mule keypad and intercom repair in Fort Lauderdale, here’s the pricing reality we quote every day:

  • Keypad-only replacement: $185 to $275 installed, including the new keypad, programming, and range testing from the street and driveway.
  • Intercom module or board replacement: $225 to $350 installed, including the new board, wire run testing, and audio quality verification at the house phone and the gate.
  • Both keypad and intercom together: $310 to $420 installed, which is the smart move when both components are older than five years and one has already failed.

Every price is quoted and agreed BEFORE any work starts, in writing. The number we put on the estimate is the number on the invoice, period. The range depends on which Mighty Mule series you have (MM260 boards are cheaper than MM571 boards), whether we need to replace a corroded wire run, and whether you want OEM or aftermarket. Every repair carries the 365-Day Done Right Promise. If the repair fails within 365 days, Calder returns at no charge. Not a prorated discount, not a service fee. A free second visit, every time.

Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

DIY or Call Us?

Here’s the honest split from Nico Alvarez, who’s been doing this work for well over a decade. You can safely check three things yourself: the battery in the keypad (a dead 9-volt or AA pack causes half of “dead keypad” calls we get), whether the keypad face is cracked or clouded with moisture, and whether the wiring at the control board is visibly corroded or chewed. What you shouldn’t do is open the keypad housing and start poking at the circuit board, especially on a unit that’s been exposed to rain. These run on low voltage, so the real risk isn’t shock. It’s turning a $200 keypad swap into a $400 control board replacement because a short happened while the system was powered. Tell me what it’s doing wrong, and I’ll tell you what it costs to fix it, in writing, before we start. Call (754) 354-2542 and describe the symptom. We’ll give you a straight answer on the phone, and if it’s a simple fix, we’ll tell you that too, even if it means you don’t need us.

FAQs

Get Your Mighty Mule Keypad or Intercom Fixed Today

If your Mighty Mule keypad or intercom is acting up in Fort Lauderdale, call Calder Gate Repair at (754) 354-2542. We’ll answer live, 24/7, and give you a straight diagnostic over the phone. You’ll get a written price before any work starts, a uniformed technician with a trackable arrival time, and the 365-Day Done Right Promise behind every repair. Calder Gate Repair is an independent service provider and is not affiliated with Mighty Mule. We’re part of the Relay Home Co. family, established 2009, and we know these systems down to the revision number.

Written by Nico Alvarez, Owner, Calder Gate Repair Fort Lauderdale at Calder Gate Repair Fort Lauderdale, serving Fort Lauderdale and nearby areas.

Need Gate Repair help in Fort Lauderdale? Licensed & insured · same-day response · free estimates
Call (754) 354-2542
Local Service Coverage

Request a Free Estimate in Fort Lauderdale

Tell us what you need - Calder Gate Repair Fort Lauderdale responds fast. No obligation.

When you send us your details, you acknowledge our Privacy Policy and consent to receive communications through phone, text, or email concerning your request, including by the partner businesses that may perform the service.

Prefer to text? Send a Text
Call Now - 24/7 Dispatch