Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFAAC Access Control Installation: The Fort Lauderdale Owner’s Guide
FAAC access control installation in Fort Lauderdale typically runs $425 – $890 fully installed, depending on which FAAC control board, keypad, or receiver unit your system needs, and we stock the most common FAAC replacement parts on our trucks for same-day service in most cases. Most Fort Lauderdale owners discover they need a new access control component when the gate stops responding to remotes, the keypad goes dead, or the system starts opening on its own at 3 a.m. You don’t need to know the exact part number before you call. That’s our job. Tell us what the gate is doing wrong, and Nico Alvarez or one of our techs will match the symptom to the right FAAC part, put a written price in front of you, and get it installed.
Which FAAC Models This Applies To
We install and replace access control components across the FAAC residential and light-commercial lineup you’ll find all over Fort Lauderdale: the 402, 412, 415, 422, and 770 series operators, plus the E024U and S418 control boards that drive many of them. The compatibility gotcha with FAAC is that older 400-series gates and newer 770-series gates use different control board revisions, and the access control wiring harness changed between the E024U and S418, so plugging a newer keypad into an older board without checking the harness pinout can fry the board. We check the board revision and the wiring before we quote a part. It saves you from buying something that won’t talk to your gate.
On the OEM-versus-aftermarket question: FAAC OEM boards and keypads are built well, but honest truth, they’re priced like European imports. For older FAAC models where the board is discontinued, quality aftermarket replacements from brands like GTO and All-O-Matic often make more sense than hunting down a $600 obsolete board on eBay. We’ll tell you which route we’d take on our own gate and why. Calder Gate Repair Fort Lauderdale is an independent service provider, not affiliated with FAAC, so we have no incentive to push one option over the other except what actually works for you. We also keep parts for LiftMaster, Mighty Mule, and Ghost Controls on the truck for mixed-brand properties.
Styles & brands we work with
Signs Your FAAC Access Control Installation Is Failing
- Gate won’t respond to any remote or keypad. The access control receiver or the control board itself has usually lost power or a relay has failed. In Fort Lauderdale’s humidity, we see corrosion on board terminals even inside weather-sealed enclosures.
- Gate opens but won’t close on its own. This often points to a failed safety input on the access control board, not the motor. The board thinks something is in the gate’s path when nothing is there.
- Keypad works sometimes, not others. Intermittent keypad response is frequently a failing ribbon connector or moisture getting into the keypad housing. Salt air near the Intracoastal accelerates this.
- Gate opens randomly with no one around. A failing receiver can pick up stray radio signals from nearby marinas or airport equipment, or a relay is sticking. We’ve seen this repeatedly in the neighborhoods east of Federal Highway.
- Gate works from the inside button but not from outside. That’s the classic access control split: the external reader or keypad has failed while the hardwired interior control still works. You need a new external access point, not a whole new gate operator.
Replacement Cost & What’s Included
Here’s what FAAC access control installation costs in Fort Lauderdale right now, parts and labor included:
- FAAC remote receiver replacement: $185 – $340
- Keypad or card reader replacement: $225 – $410
- Control board replacement (E024U or equivalent): $380 – $620
- Full access control retrofit with new receiver, keypad, and wiring clean-up: $520 – $890
What drives the range is board availability, how much of the existing wiring is salvageable, and whether your FAAC model needs an OEM part or a compatible aftermarket unit. Every quote includes the part, the labor to install it, wiring verification, and re-syncing all your existing remotes and keypads. The price we put in writing before we start is the price on your invoice, period. That’s not a courtesy, it’s how we run every job in Fort Lauderdale.
See the difference
Before
After
Before
After
Before
AfterDIY or Call Us?
Access control components on a FAAC gate run on low-voltage DC, so you’re not dealing with the high-tension springs or cables that make gate mechanical work genuinely dangerous. The real risk with DIY here is electrical: shorting the wrong terminal on a control board can take out the transformer or the board itself, turning a $300 repair into a $700 one. If you want to check something before calling us, visually inspect the access control enclosure for ants, geckos, or moisture, which are common in Fort Lauderdale yards and cause more board failures than anything else. Beyond that, a meter and a board schematic are where DIY starts costing more than the service call. Call (754) 354-2542 and tell us what it’s doing wrong. We’ll tell you what it costs to fix, in writing, before we start.
FAQs
In South Florida’s heat and humidity, expect 7 – 10 years from a FAAC control board before corrosion or component drift starts causing problems, with units near the ocean or on poorly ventilated enclosures trending toward the shorter end. Salt air is the biggest lifespan killer we see in Fort Lauderdale, not the board’s build quality. Call (754) 354-2542 if your board is acting up and we’ll tell you if it’s worth repairing or time to replace.
Sometimes we can repair a FAAC board if the failure is limited to a replaceable relay or a corroded terminal strip, but when the board has multiple failed components or moisture damage across the circuit traces, replacement is cheaper and more reliable long-term. We’ll show you the board and explain exactly what we found before recommending either path. Estimates to diagnose are free.
Most FAAC access control replacements in Fort Lauderdale take 60 to 90 minutes on site, including wiring verification and re-syncing all remotes and keypads, and we usually carry the common parts on the truck so there’s no second visit. Multi-component retrofits can run up to three hours. We’ll give you a realistic window when you call (754) 354-2542.
We keep FAAC receivers, keypads, and the most common control board models stocked on our service vehicles because FAAC is one of the nine brands we’re trained on and carry parts for daily across Fort Lauderdale. If your specific board revision isn’t on the truck, our supplier network in Broward gets most FAAC parts to us same-day or next-day. We’ll tell you upfront which situation you’re in before we schedule.
Call Calder Gate Repair Fort Lauderdale for FAAC Access Control Installation
If your FAAC gate isn’t responding the way it should, call (754) 354-2542. A live person answers 24/7, we’ll give you a written price before any work starts, and every access control installation carries the 365-Day Done Right Promise: if the repair fails within a year, we come back and make it right at no charge. No voicemail tag, no vague arrival windows. You’ll know who’s coming, when they’ll arrive, and exactly what it costs. That’s the Relay Standard we’ve run since 2009, and it’s how every job goes in Fort Lauderdale.
Written by Nico Alvarez, Owner, Calder Gate Repair Fort Lauderdale at Calder Gate Repair Fort Lauderdale, serving Fort Lauderdale and nearby areas.