Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Electric Gate Repair Across West Park
Electric gate repair in West Park usually runs $180 to $540 for common fixes like limit switches, keypads, and remote receiver boards, with motor replacement ranging $425 to $900 depending on brand. Most jobs take one visit, and we carry parts for LiftMaster, Mighty Mule, FAAC, and BFT on our trucks so we’re not sending you back to a dead gate for days. If your gate won’t open, won’t close, or is making a grinding noise on SW 40th Ave or near McTyre Park, call (754) 354-2542 and a live person picks up 24/7.
Why Calder Gate Repair Fort Lauderdale Is West Park’s Preferred Electric Gate Repair Company
West Park’s housing stock runs older than most South Florida cities. That means the gates we’re called to fix were often installed decades ago, wired for operators that no longer exist, and hung on posts that have been fighting a high water table since the first wet season. We know exactly what that looks like before we pull into the driveway. Our Electric Gate Repair team works West Park daily, so we’re familiar with the narrow driveways off Hallandale Beach Blvd and the older duplex layouts near SW 25th St that make gate access tight.
Calder Gate Repair is part of the Relay Home Co. family, founded in 2009 and independently owned within that network. Nico Alvarez leads our Fort Lauderdale crew, and every technician arrives background-checked, in uniform, with a live arrival time you can track from your phone. No four-hour windows. No “sometime between noon and whenever.” You see us coming, you know who’s at the gate, and you get a written price before anything gets unbolted.
We put three things in writing on every single job: a written price before work starts, a written guarantee on the repair, and the 365-Day Done Right Promise. If that repair fails within a year, we come back free and make it right. That’s not a sales line, it’s just what the invoice says.
Styles & brands we work with
Automatic Gate Repair in West Park
Automatic gate repair in West Park typically means the opener won’t respond, the gate stops halfway, or it reverses for no reason. That’s usually a control board failure, a dead capacitor, or a limit switch that gave up after years of salty air and afternoon thunderstorms. Most control board replacements on a LiftMaster or FAAC unit run $240 to $385 including labor, and we finish the majority of these in under two hours.
Control Board Replacement
West Park’s summer lightning season is hard on pre-2000 openers. A power surge roasts the board, and suddenly the gate won’t move even in manual mode. We stock new boards for LiftMaster and FAAC units, and we check the surge protection setup at the same time so it doesn’t happen again in August.
Limit Switch and Sensor Repair
The limit switch, which is the small sensor that tells the gate when to stop moving, fails gradually. Your gate might start closing too far and scraping the concrete, or not close all the way. Repairing or replacing limit switches in West Park runs $120 to $210, and it’s a repair we nearly always complete same-day.
Electric Gate Motor in West Park
Electric gate motor replacement in West Park is the honest fix when a 1970s LiftMaster or early FAAC operator has been soaked by two hurricanes and rebuilt twice already. A full motor swap runs $425 to $900 depending on the model, the gate’s weight, and whether we need to update the mounting plate to fit a modern unit. If we can retrofit instead, we’ll tell you that and show you the math on a written quote.
Motor Diagnostics
Before we quote a new motor, we test the capacitor, the board, and the gear assembly. On a 1960s ranch near SW 40th Ave, our tech found a bent swing gate with an original LiftMaster operator and no safety photocells, which is typical for West Park. We re-set the hinge post in a deeper concrete footing, added UL 325-compliant photo-eyes, and replaced the water-damaged control board, bringing the gate up to code without a full replacement.
Mighty Mule and Diy Systems
If you installed a Mighty Mule or Ghost Controls opener yourself a few years back and it’s now clicking but not moving, the problem is usually water intrusion in the arm or a failed battery. We repair these regularly for West Park homeowners, and we’ll tell you straight if a replacement unit makes more sense than chasing a three-year-old motor that was never rated for a coastal climate.
Trusted Brands We Service in West Park
Our techs are factory-familiar with nine major gate opener brands, and for West Park specifically we see a lot of older LiftMaster, FAAC, and Mighty Mule units still in service. We stock local parts for those three plus BFT, so most repairs don’t wait on a shipment. That matters when your gate is stuck open and your driveway opens onto Pembroke Road.
See the difference
Before
After
Before
After
Before
AfterCommon Electric Gate Repair Problems We See in West Park Homes
- Obsolete control boards from pre-2000 LiftMaster and FAAC units: These fail after summer lightning strikes, leaving you unable to open the gate manually because the board no longer disengages the motor. We replace the board and install surge protection so the next storm doesn’t do the same thing.
- Rusted hinge posts and sagging panels: Decades of salt-air exposure eats the post at ground level. Re-welding the gate without addressing the rotted post only lasts one season, so we always check the footing first.
- Missing or bypassed safety photocells: Gates installed before Florida tightened entrapment codes often lack photo-eyes entirely. If your motor fails in the closed position, that’s a liability, and we flag it on every single West Park inspection.
- Shifted posts from saturated soil: West Park’s high water table and coastal storm surge mean many gate installations sit on shallow, waterlogged post footings. We routinely find gate posts that have shifted up to half an inch in a single wet season, which is why sag correction here starts at the hinge post, not the panel.
Pricing for Electric Gate Repair in West Park, FL
Here’s what you can expect to pay before you call. Keypad and remote receiver replacement runs $135 to $240. Limit switch and safety sensor repair runs $120 to $210 each. Control board replacement runs $240 to $385. Full motor replacement runs $425 to $900 depending on brand and gate weight. A new Mighty Mule DIY-style opener installed runs $550 to $800. The number we quote at the door is the number on your invoice, written before any work starts. If we find something else while we’re in there, we show you, explain it, and get your approval before touching a second bolt. Call (754) 354-2542 for a free estimate, or track us live from your phone once you book.
We Also Serve Cities Near West Park
Calder Gate Repair Fort Lauderdale runs crews through West Park daily, and we also handle gate repair across Fort Lauderdale, Pompano Beach, Sunrise, and Margate. If you’ve got a stuck gate or a dead opener in any of those areas, the same written pricing and 365-Day Done Right Promise applies. One call gets you a live person and a trackable arrival time.
Serving West Park, FL - Our Local Coverage Area
We’re based in the West Park area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Electric Gate Repair in West Park
We can usually repair the motor if the armature and gear assembly are still sound, which costs $425 to $900 depending on what’s failed. But a pre-2000 LiftMaster without photo-eyes doesn’t meet current Florida entrapment codes, so we’ll add UL 325-compliant sensors as part of the job for $120 to $210. It’s cheaper than a full replacement and it means someone can’t get pinned by a gate that fails in the closed position. Call (754) 354-2542 for a written quote on your specific model.
Your post footing is sitting in saturated soil. West Park’s high water table means the ground under shallow footings turns to mud during wet-season storms, and a 200-pound gate leaning on a wet post will push it out of plumb. The fix is re-setting the hinge post in a deeper concrete footing, not re-welding the sag out of the panel. We do this exact repair all over West Park, and it starts at $300 for a standard swing gate post. Call (754) 354-2542 and we’ll give you an exact price before we dig.
The quickest fix is replacing the keypad and checking the receiver board for surge damage, which runs $135 to $240 for the keypad and $240 to $385 if the board got fried too. That’s a same-day repair for us, and we’ll add a surge protector at the outlet so the next storm doesn’t burn through another board. Call (754) 354-2542 to get on the schedule today.
We stop re-welding it. A gate that’s been welded twice is either too heavy for its hinges or its post is no longer vertical. On the narrow, angled driveways common in West Park, clipped corners add to that stress. We re-set the post, replace the hinges with heavier gauge hardware, and often lighten the panel by swapping solid steel infill for aluminum. That repair runs $300 to $600, and it actually lasts. Call (754) 354-2542 for an assessment.
A 1950s steel gate can be retrofitted if the post is sound and the gate weighs less than 800 pounds, which most mid-century West Park gates do. A solar-compatible opener like a Mighty Mule or Ghost Controls unit installed and set up runs $550 to $800. But if the post is rotted through at ground level or the gate’s been re-welded three times, replacement is the cheaper five-year answer, and we’ll show you the math on paper. Call (754) 354-2542 for a written quote.
Contact Calder Gate Repair Fort Lauderdale: Need electric gate repair in West Park? Call (754) 354-2542 now. A live person answers 24/7, the estimate is free, and the price you approve is the price you pay. No voicemail, no chatbots, no gate left stuck overnight.
Written by Nico Alvarez, Owner at Calder Gate Repair Fort Lauderdale, serving West Park and nearby South Florida communities.