Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Electric Gate Repair Across Pompano Beach
A dead gate opener in Pompano Beach usually comes down to one of three things: a fried control board, corroded wiring, or a motor that’s finally given up after years of salt air. Most electric gate repairs in Pompano Beach cost between $180 and $450 for labor, plus parts if a board or motor needs replacing. Our techs are local, we answer the phone 24/7, and you’ll get a written price before we touch a single bolt. Call (754) 354-2542 and we’ll have a background-checked, uniformed technician at your gate with a trackable arrival time, not a vague four-hour window.
Pompano Beach is a different animal for gate repair. The barrier island and canal-front properties punish metal and electronics harder than anywhere else in Broward County. We know that before we even roll up, because we see it every week from Lighthouse Point down to Cypress Bend and over to the Garden Isles canals.
Why Calder Gate Repair Fort Lauderdale Is Pompano Beach’s Preferred Electric Gate Repair Company
Calder Gate Repair is the dedicated gate repair specialist inside the Relay Home Co. family, and we’ve built our name in Pompano Beach on one principle: tell the customer what’s wrong in plain language, put the price in writing, and stand behind the work for a full year. That last part is the 365-Day Done Right Promise, and it’s written on every job we do. If the repair fails within 365 days, we come back at no charge. That’s not a vague guarantee, it’s the terms we hand you before we start.
Reviews from Pompano Beach customers point to the same things: a live person answers the phone, the technician arrives when the tracking link says he will, and the invoice matches the quote. No dispatch center runaround. No “we’ll be there between noon and five.” Every call is answered by a human, 24 hours a day, 7 days a week. Nico Alvarez, who runs Calder Gate Repair Fort Lauderdale, built the team around that standard. The Relay Standard, as we call it, is simple: live arrival time, before-and-after photos, and a digital invoice you pay from a link. It’s how gate repair should have always worked.
Our techs train on nine major opener brands, including LiftMaster, FAAC, Mighty Mule, and BFT. That matters in Pompano Beach, where older homes often have original FAAC or Mighty Mule operators still in service. Most companies send a general handyman. We send someone who can read the board, diagnose the limit switch, and tell you honestly whether it’s worth fixing or time to replace.
Styles & brands we work with
Automatic Gate Repair in Pompano Beach
Automatic Gate Repair in Pompano Beach means diagnosing and fixing the parts that open, close, and protect your gate: from the motor and control board down to the safety sensors, keypads, and remotes. Homeowners call us when a gate stops mid-cycle, refuses to close all the way, or starts beeping for no apparent reason. Most jobs we fix same-day for $180 to $450 in labor, with parts quoted separately and approved before we order anything.
What We Diagnose and Fix
The most common automatic gate problems in Pompano Beach come down to salt corrosion and boards that predate modern safety standards. A 1970s FAAC operator with an original logic board can burn out a relay from humidity bridging the contacts, and a Mighty Mule unit from the 80s might need a new battery and limit switch to behave again. We carry a broad stock of replacement boards, capacitors, and sensors, so most repairs don’t wait on parts.
When Repairs Stop Making Sense
Some legacy operators aren’t worth saving. If a gate motor is original to a 1960s ranch home and hasn’t been converted to current UL 325 entrapment standards, replacing the operator with a new unit that includes photo eyes and a reversing edge is often cheaper than patching a system that fails every storm season. We’ll tell you straight: retrofit if the bones are good, replace if the electronics are done.
Electric Gate Motor in Pompano Beach
An Electric Gate Motor in Pompano Beach works twice as hard as one inland, pushing against wind, dragging a rusted track full of salt film, and soaking in humidity that reaches the windings. When a motor burns out in a slide gate, it often takes the drive gear with it, especially if the rack and pinion have pitted from constant salt exposure. Motor replacement in Pompano Beach typically runs $350 to $650 for labor, plus the motor itself, depending on the operator and access.
Signs Your Motor Is Failing
A motor that hums but doesn’t move, trips the breaker, or moves the gate at half speed is on borrowed time. In Pompano Beach, that timeline is shorter. The humid air gets into armature windings and bearings fail faster, especially on older swing gate arms mounted low to the ground where salt spray pools. If the gate sounds labored or the motor housing is hot to the touch after a cycle, that’s a warning sign you should not ignore.
Motor Replacement vs. Rebuild
On a newer LiftMaster or BFT unit, a motor swap is often the cleanest fix. On a decades-old FAAC arm from the 1970s, a new motor without a new board and limit kit can leave you with the same intermittent dead gate you started with. Our techs price both honestly and show you the numbers before any work starts.
Trusted Brands We Service in Pompano Beach
We service LiftMaster, FAAC, BFT, and Mighty Mule operators, along with five other major brands. For Pompano Beach customers, we keep local stock of the parts that fail most in salt air: limit switches, control boards, photo eye sensors, and stainless rack hardware. That means no waiting a week for a part while your gate hangs open. FAAC boards for older 400 and 750 series units, LiftMaster LA400 arms, and Mighty Mule replacement motors are the ones we change most on canal-front and barrier island properties. If you own one of those systems, we can usually have it diagnosed and fixed the same visit.
Common Electric Gate Repair Problems We See in Pompano Beach Homes
- Corroded relay contacts on legacy control boards. Homes built in the 1950s through the 1970s often still run original FAAC or Mighty Mule boards. Humidity and salt air bridge the relay contacts and the board cooks itself. Symptom: gate opens but won’t close, or closes but won’t reopen.
- Underground low-voltage wire failure. Older ranch homes on NE 23rd Ave and nearby streets ran gate wiring through rigid conduit that’s now full of brackish canal water. The transformer wicks moisture and the gate goes dead after heavy rain. This one is intermittent and frustrating.
- Zinc-plated rack and pinion hardware pitting and binding. Slide gates on waterfront lots collect a salt film that eats standard zinc plating within a year. The rack pits, the drive gear strips, and the gate shudders or jams. We replace with 316 stainless wherever possible.
- Sagging or rusted hinge posts on swing gates. A 1960s gate with the original post might be so eaten away at the base that the gate sags 2 inches and drags. The motor fights the weight and burns out. New stainless post, new footing, re-tuned limits, and the gate runs like new.
See the difference
Before
After
Before
After
Before
AfterPricing for Electric Gate Repair in Pompano Beach, FL
Most electric gate repairs in Pompano Beach run $180 to $450 in labor. That covers diagnosis, small parts like limit switches and sensors, and the technician’s time. If you need a control board, that typically adds $150 to $400 depending on brand. A full motor replacement usually lands between $350 and $650 in labor plus the motor, which runs $300 to $900 for the common LiftMaster, FAAC, and Mighty Mule units we service. Corroded underground wire replacement runs $250 to $500 depending on the run length. You’ll get a written quote before any work starts, and that’s the number on your invoice. No add-ons, no surprise line items. Estimates are free, so call (754) 354-2542 and we’ll give you exact numbers for your gate.
We Also Serve Cities Near Pompano Beach
Calder Gate Repair Fort Lauderdale covers the whole Pompano Beach area and the cities around it. If you’re in Margate or Fort Lauderdale, the same crew and the same 365-Day Done Right Promise apply. Our Electric Gate Repair team dispatches from our South FL office to every neighborhood in the area. For more about our local coverage, see Electric Gate Repair in Pompano Beach.
Serving Pompano Beach, FL - Our Local Coverage Area
We’re based in the Pompano Beach area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Electric Gate Repair in Pompano Beach
Yes, in most cases we can retrofit a 1970s FAAC swing gate operator with photo eyes and a reversing edge to meet UL 325, so long as the motor and board are still healthy. The retrofit usually runs $250 to $450 in labor plus the sensor parts. But if the board has already started failing from salt corrosion, a new operator with built-in entrapment protection often costs about the same once you factor in the second repair call. A swing gate without proper entrapment protection is a genuine safety hazard, especially with kids and pets around, so we never delay on this fix. Call (754) 354-2542 and we’ll assess your FAAC and give you the retrofit price against the replacement price, both in writing.
Paint doesn’t stop salt spray on a canal-front slide gate in Pompano Beach, because the salt film builds up underneath the coating and eats the zinc plating from the inside out. Every fall, the drier air lets that salt crust harden and flake, exposing bare metal. We replace standard zinc-plated hinge posts and rack hardware with 316 stainless steel, which holds up a full year or more where zinc fails in months. That’s the difference between a repair that lasts and one that comes back. For a stainless rack and hardware quote on your canal-front gate, call (754) 354-2542.
For Pompano Beach, we recommend a deep-cycle battery backup rated for at least 20 cycles at your gate’s weight, paired with a surge suppressor at the operator. Hurricane season means power flickers and outages that can fry a control board in an instant. A sealed AGM battery wired into the operator keeps the gate functional through short outages, and a good surge suppressor stops the transformer from taking a hit. We stock and install both for most LiftMaster and BFT units. The installed cost for a battery backup and surge protection typically runs $350 to $600. Call (754) 354-2542 for a specific recommendation for your operator.
We test the wire with a megohmmeter, which sends a high voltage pulse through the insulation to measure leakage to ground. If the reading shows breakdown, the wire is done, and we can usually trace the fault location with a time-domain reflectometer before we dig. In Pompano Beach, the culprit is almost always the old rigid conduit: brackish canal water seeps in, sits against the wire for decades, and the insulation degrades from the inside. We can run new direct-burial UF cable in a shallow trench along the existing path, usually without disturbing most of your driveway. Testing runs $150 to $250. For a full diagnosis of your 1950s wiring, call (754) 354-2542.
Yes, you can add a keypad entry to most older DoorKing and Elite operators, as long as the control board has a spare accessory input and the power supply can handle the additional draw. We wire in a weather-resistant keypad, program the access codes, and seal the housing against the salt air that kills exposed electronics on canal-front properties in Pompano Beach. The keypad and installation typically run $250 to $400. If your board doesn’t have a spare input, we’ll show you the retrofit options before you spend anything. Call (754) 354-2542 for a keypad quote on your DoorKing or Elite system.
Call Calder Gate Repair for Electric Gate Repair in Pompano Beach
You don’t have to live with a gate that groans, sticks, or refuses to close. And you shouldn’t have to wonder what the bill will be before anyone shows up. Nico Alvarez and the whole Calder Gate Repair team serve Pompano Beach with one promise: a written price before work starts, a written guarantee on every repair, and a free second visit if the fix fails within 365 days. A live person answers the phone now. Call (754) 354-2542 and we’ll schedule your free estimate, with a trackable arrival time you can follow from your phone.
Written by Nico Alvarez, Owner at Calder Gate Repair Fort Lauderdale, serving Pompano Beach and the surrounding Broward County area.