Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in Dania Beach, FL
Gate repair in Dania Beach is different from inland Broward County, and the reason comes down to two things: salt air and the city’s aging, low-lying housing stock. We’re Calder Gate Repair, the dedicated gate specialist inside the Relay Home Co. family, and most of the work we do here involves corroded hinges, rusted rollers, and opener circuit boards eaten by humidity on homes built between the 1950s and 1970s. If your gate is stuck, slow, or making a grinding noise, call us at (754) 354-2542 and we’ll send a background-checked technician with a live arrival time you can track from your phone.
Why Dania Beach Homes Are Different
Dania Beach sits low and close to the water. The Intracoastal runs along the western edge, the ocean is a mile east, and the canals thread through the older neighborhoods in between. That proximity means the air carries salt, and salt does not forgive metal. We replace more rusted-through bottom hinges and seized rollers in Dania Beach than almost anywhere else we work in South Florida. The housing stock compounds the problem: most of these homes are mid-century, single-family or small multi-family buildings, many with their original wrought iron or aluminum driveway gates. A gate installed in 1968 has spent over fifty years in salt air and seasonal floodwater, and the hardware shows it.
There’s a pattern local techs see so often it has a nickname: “Dania Beach knee rot.” Drive through the Lauderdale Isles or southeastern Dania Beach after a heavy rain and you’ll see gate after gate where the board is fine, the gearbox is fine, but the bottom hinge has corroded completely through. That is the repair call we make most here, and it influences how we quote: we always inspect the full hinge assembly and the lowest six inches of the gate before writing a price, because rust starts at the bottom and works up. King tides and storm surge can also submerge gate tracks and operator boxes in the low-lying areas near the canals, which means water intrusion into the opener is a recurring seasonal issue rather than a one-off event.
Age matters too. The swing gate openers on these original gates are often first or second generation units, and the parts for them have been discontinued. When we open them up on a Dania Beach driveway, the real question is usually whether we are repairing or replacing the opener, and we’ll give you both numbers in writing before anything starts. Nico Alvarez, who leads our team, insists on that. No surprises at the door, ever.
Styles & brands we work with
Our Main Dania Beach Services
Most Dania Beach homeowners call us for one of three things: a gate that will not open, an opener that stopped responding, or an electric gate that trips its breaker or moves erratically. Each of these has its own page below, with pricing and the specific Dania Beach conditions.
Gate Repair in Dania Beach
Gate repair here is rarely just adjusting a wheel. On a 1960s aluminum drive gate in Dania Beach, the job is usually a rusted hinge, a sagging frame, a seized roller, or a track that has shifted out of alignment after a decade of settling and storms. We weld, reinforce, replace hardware, and re-square the gate so it opens smoothly again, and we inspect the low points near the canal-facing side where salt and standing water do the most damage. Gate Repair in Dania Beach is the page with full pricing and what a typical repair includes.
Electric Gate Repair in Dania Beach
Electric gates in Dania Beach fail differently than gates inland. The operator box sits low, often too low, and in a heavy rain or king tide the box can take on water. The symptom is usually the gate stopping mid-travel, moving in one direction only, or humming without moving. We troubleshoot the full circuit: the control board, limit switches (the small sensors that tell the gate when to stop), capacitors, and the safety photo eyes. Salt corrosion on connection terminals is the most common culprit. Electric Gate Repair in Dania Beach covers the full diagnostic process and price ranges.
Gate Opener Repair in Dania Beach
When the gate is still balanced and swinging freely but the opener does not respond, you are looking at an opener job. In Dania Beach, the common failure points are circuit boards with corrosion from humidity, gearboxes that have stripped from years of pushing a heavy gate, and capacitors that give out in the heat. We handle LiftMaster, FAAC, BFT, Mighty Mule, and several more brands, and if the opener cannot be saved, we give you a replacement price up front. Gate Opener Repair in Dania Beach has the details.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Dania Beach
We’re factory-familiar with the openers Dania Beach homeowners actually have, including LiftMaster, FAAC, BFT, and Mighty Mule. We keep common boards, remotes, and limit switches stocked locally, which means most opener repairs finish the same day. See our brands for the full list.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in Dania Beach, FL
| Service | Typical range in Dania Beach |
|---|---|
| Gate opener repair | $180 – $440 before parts |
| Electric gate repair | $190 – $460 |
| Gate repair (general) | $165 – $420 |
| Service call and diagnostic | $75 – $120 |
| Opener board replacement | $240 – $510 |
| Gearbox replacement | $260 – $490 |
| Limit switch replacement | $130 – $220 |
| Remote or keypad replacement | $90 – $180 |
| Hinge or roller replacement | $150 – $350 |
| Track realignment | $110 – $260 |
What pushes a Dania Beach repair toward the top of these ranges is usually corrosion. A hinge that has rusted through can take longer to remove, and if the low section of the gate needs reinforcement before new hardware goes on, the labor increases. Either way, you get a written price before any work starts, and that is the number on your invoice, period.
Neighborhoods We Serve in Dania Beach
We cover the full city, and we are usually in Dania Beach within an hour or two of your call. The neighborhoods below are just a sample of where we run daily.
- Lauderdale Isles
- Dania Beach Isles
- Southeastern Dania Beach
- Melaleuca Gardens
- Dania Beach Marina area
Service Area – Cities Near Dania Beach
If you are just outside Dania Beach, we also cover Fort Lauderdale, FL, Pompano Beach, FL, Sunrise, FL, and Margate, FL. Dispatch and scheduling are coordinated from our Miami (South FL) office, and crews serve Dania Beach locally.
Serving Dania Beach, FL - Our Local Coverage Area
We’re based in the Dania Beach area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Dania Beach
In most cases we can have a technician at your Dania Beach property within an hour or two of your call. We dispatch live arrival times so you know when we are coming, and you can track the technician from your phone. For urgent or emergency repair, call (754) 354-2542 and a live person will answer.
If you live in a community with an HOA, it is worth checking your governing documents, because some Dania Beach HOAs have rules about gate appearance or opener types. In most cases a repair or replacement using the same style of gate does not need any approval, and if you are unsure, we can point you toward the right question to ask. The city generally does not require a permit for a gate repair.
We serve the entire city of Dania Beach, including the Lauderdale Isles, the southeastern neighborhoods, the marina area, and the small apartment complexes throughout the older residential streets. If you are within the city limits, you are in our service area. Call (754) 354-2542 and we will schedule a free estimate.
If your gate is stuck, grinding, or not responding, call Calder Gate Repair at (754) 354-2542. We will give you a written price before any work begins, a written guarantee on every repair, and a free second visit if anything goes wrong within 365 days. Home is where you can learn more about the company behind the work.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Dania Beach Customers Say
"Booked online. The tech texted his ETA and arrived on time. Gate opener was dead; he replaced the control board and tested the sensors."
- Terry W."Booking was easy and the job was done quickly."
- Seth R."Quote came in the app before the visit. No surprise at the end."
- Ginny L.