Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in Sunrise, FL
Calder Gate Repair handles gate jobs across Sunrise, FL, from swing-gate hinge replacements in older HOA communities to complete opener retrofits on 1990s-era driveway gates. Most homes here were built between the 1970s and 1990s, which means the gate hardware has now outlived its original design life, and South Florida’s sun, salt air, and afternoon lightning do the rest. If your gate groans, stalls mid-cycle, or won’t respond to the keypad, call (754) 354-2542 and we’ll send a background-checked technician with a live, trackable arrival time.
Why Sunrise Homes Are Different
Sunrise isn’t a new-construction market. Most of the housing stock is 30 to 50 years old, and a large share of those homes sit in gated communities or HOA-governed townhome and condo complexes. That matters for gate work because the original operators on those properties were often installed in the 1980s and 1990s, long before modern surge protection was standard. We regularly open control boxes in Welleby and Springtree and find electromechanical operators that have been patched together for decades, with hard-to-find parts and wiring that was never rated for today’s lightning activity.
The climate pushes things faster here than most people expect. Intense UV exposure bakes powder coating off steel gates. High humidity and salt air from the Everglades and the Atlantic corrode hinges, rollers, and circuit boards. And Sunrise sits squarely in the path of Florida’s afternoon thunderstorm cycle, which sends power surges into gate operator boards and keypads with surprising frequency. A gate that worked fine on Monday can refuse to open after Tuesday’s storm, and the fix is usually a fried control board or a shorted limit switch, the small sensor that tells the gate when to stop traveling.
Styles & brands we work with
Our Main Sunrise Services
These are the three calls we make most often in Sunrise, each with its own dedicated page so you can get straight to the details that matter for your situation.
Gate Repair in Sunrise
A gate that drags on the concrete in Sunrise is usually a failed hinge or a worn roller, and leaving it too long bends the gate frame itself. On older aluminum and steel driveway gates, we see exactly this pattern after a few hurricane seasons: the leaf sags, the latch no longer aligns, and the opener strains against the load until something fails. We replace hinges, rebuild sagging frames, and adjust the gate so the opener isn’t fighting dead weight. If the gate won’t move at all, the cause is often a burned-out capacitor or a snapped chain on the operator side. Read more on our Gate Repair in Sunrise page.
Electric Gate Repair in Sunrise
Electric gate failures in Sunrise split into two camps: mechanical issues with the gate itself and electrical issues with the system that drives it. The electrical side includes the keypad, the loop detector under the driveway, the photocells near the gate edges, and the wiring that ties it all together. After a storm, we often find a keypad that won’t accept codes or a loop detector that no longer senses a car waiting. These are repairable, not always replaceable, and the right diagnosis saves real money. See Electric Gate Repair in Sunrise for the full breakdown.
Gate Opener Repair in Sunrise
Most opener failures in Sunrise homes trace back to one of three things: a surge-damaged control board, a stripped drive gear, or a limit switch that lost its setting. Older operators, especially the 1980s-era units still running in communities like Welleby, were never designed for Florida’s lightning frequency. We retrofit surge protectors on those systems as a standard part of the repair, because replacing the board without addressing the surge source just means another failure next storm season. For details on brands and symptoms, visit Gate Opener Repair in Sunrise.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Sunrise
Our technicians work on the brands most common in Sunrise driveways and HOA entrances, including BFT, Linear, Viking, and Ghost Controls. We keep common boards, remotes, and limit switches in the truck, which means most opener repairs don’t wait on a parts shipment. For the full list of what we service, see our brands.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in Sunrise, FL
| Service | Typical range in Sunrise |
|---|---|
| Gate opener repair | $180 – $340 before parts |
| Electric gate repair (diagnostic + labor) | $150 – $400 before parts |
| Hinge replacement | $120 – $350 per hinge |
| Roller replacement | $80 – $220 per roller |
| Control board replacement | $220 – $520 including common boards |
| Keypad replacement or reprogramming | $95 – $250 |
| Loop detector repair or replacement | $180 – $420 |
| Surge protector retrofit | $75 – $180 |
| Full diagnostic visit | $49 – $99, credited toward repair |
In Sunrise, the biggest price movers are the age of the operator and whether the gate has already suffered hurricane or lightning damage. If your 1988 control board has been limping along with spliced wiring and no surge protection, the repair will cost more than a clean, recent install, because we’re correcting years of accumulated damage, not just swapping one part.
Whatever the number, you’ll see it in writing before work starts. The price we quote at the door is the price on the invoice. No exceptions.
Neighborhoods We Serve in Sunrise
We run calls across Sunrise every day, and the gate setups vary noticeably by neighborhood. The older sections tend to have original hardware that’s been repaired more than once, while newer complexes have modern operators with better surge handling but more electronics to diagnose.
- Welleby
- Springtree
- Sawgrass Mills area
- Sunrise Golf Village
- New Orleans Homes
Response time across Sunrise is typically the same day for repair calls, with emergency gate-down situations prioritized whenever possible.
Service Area – Cities Near Sunrise
Calder Gate Repair also runs routes through the surrounding cities. If you’re just outside Sunrise and your gate is down, we can usually reach you the same day. Our nearby coverage includes Fort Lauderdale, FL, Pompano Beach, FL, Margate, FL, and Hallandale Beach, FL.
Serving Sunrise, FL - Our Local Coverage Area
We’re based in the Sunrise area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Sunrise
Most repair calls in Sunrise are reached the same day, and we dispatch with a live, trackable arrival time so you’re not waiting on a four-hour window. A real person answers the phone 24/7 and can book the call, update you, or troubleshoot while the technician is en route. Call (754) 354-2542 to check today’s schedule.
Many Sunrise gate communities require HOA approval before exterior gate work, especially anything visible from the street. For repairs that restore existing function, approval is usually fast. For changes to the gate style or opener type, check your HOA’s architectural guidelines first. We can provide a written scope of work for any HOA submission.
Yes, and we do it often in Sunrise. The older operators still running in Welleby and Springtree are well within our range, and we stock common parts for BFT, Linear, Viking, and Ghost Controls units from that era. If a part is no longer manufactured, we’ll retrofit a modern equivalent and add surge protection so the new board lasts. Call (754) 354-2542 for a free estimate on your specific gate.
If your gate is making noise, moving slow, or dead after last night’s storm, call Calder Gate Repair at (754) 354-2542. We’ll give you a written price before any work starts, and every repair is covered by the 365-Day Done Right Promise. If the fix fails within 365 days, we return at no charge. That’s the standard, in writing, on every Sunrise job.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Sunrise Customers Say
"Booked online. The tech texted his ETA and arrived on time. Gate opener was dead; he replaced the control board and tested the sensors."
- Terry W."Booking was easy and the job was done quickly."
- Seth R."Quote came in the app before the visit. No surprise at the end."
- Ginny L.