FAAC Electric Gate Repair Nationwide

FAAC Electric Gate Repair in Fort Lauderdale: What to Know First

FAAC electric gate repair in Fort Lauderdale typically runs $185 – $465 for most opener jobs, and we complete roughly 70% of repairs the same day we diagnose them. Most failures are moisture-related board faults, failed limit switches, or worn capacitors, not failed motors. If your FAAC gate is stuck, beeping, or only opens halfway, call (754) 354-2542 and we’ll give you a real diagnosis and a written price before any work starts.

Call (754) 354-2542

This page is for Fort Lauderdale homeowners and property managers who own a FAAC swing or slide gate opener and want straight answers: what’s actually wrong, what it costs, and how fast it can be fixed. We’re Calder Gate Repair Fort Lauderdale, an independent FAAC service provider (not affiliated with or authorized by FAAC), and Nico Alvarez leads our repair team. We work on FAAC equipment every week across Fort Lauderdale, from Victoria Park to Coral Ridge to Rio Vista, and we’ll tell you plainly if your opener is worth saving or should be replaced.

How FAAC Products Fail – and How We Fix Them

FAAC builds solid hydraulic and electromechanical operators, but every brand has its weak points. Here’s what we actually see on FAAC jobs in Fort Lauderdale, not what a spec sheet says should happen.

• Control board corrosion on FAAC E124 and 400-series operators: Fort Lauderdale’s humidity and salt air get inside the control housing, especially on gates facing the Intracoastal or within a mile of the beach. We regularly find green corrosion on the board’s low-voltage terminals, which causes the gate to stop mid-travel or refuse to respond to remotes. The fix is usually terminal cleanup and resealing the housing, but if the board’s relay is pitted we replace it with a new FAAC board, not a reconditioned one, because a reconditioned board in this climate tends to fail again within a year.
• FAAC 750 and 760 swing-arm oil leaks: These hydraulic operators are common on older Fort Lauderdale estates, particularly in the Las Olas corridor and along the canals. When the piston seals harden from heat and age, hydraulic fluid weeps out and the gate slows to a crawl before locking up. We replace the seal kit and refill with the correct FAAC hydraulic oil. A lot of companies skip the seal kit and just top off the fluid, which works for about three weeks. We do it right.
• Limit switch drift on FAAC 415 and S800 slide gate models: The limit switch tells the gate where to stop. On Fort Lauderdale properties with shifting concrete or settled paver driveways, the magnets or mechanical cams slip out of position, so the gate overtravels past the closed position and triggers the safety reverse, or stops short and leaves a gap. We’ll recalibrate and, if the switch is original and tired, replace it. This is a $120 – $180 repair done in under an hour.
• Failed start capacitors on FAAC C720 and C721 boards: South Florida heat cooks capacitors faster than anywhere else in the country. The symptom is specific: the gate hums but won’t move, or it moves sluggishly for the first half second then trips. A new capacitor is under $60 in parts, and we’ve never had a callback on this fix when we also clean the board’s heat sinks.
• Remote and receiver desync after power surges: Thunderstorm season in Fort Lauderdale means brownouts and surges, which scramble FAAC’s onboard receiver. The gate works from the keypad but not the remote, or the remote only works from two feet away. That’s not a remote problem in most cases, it’s the receiver board resetting its rolling codes. We reprogram and, if we see repeated surge damage, recommend a small inline suppressor that costs less than $40 and prevents the issue from coming back.

Our FAAC Electric Gate Repair Process

Here’s exactly what happens when you call us about a FAAC opener in Fort Lauderdale:

1. 1
   You call (754) 354-2542. A live person answers, 24/7. We ask what the gate is doing or not doing, and we schedule a window with a trackable arrival time, not a four-hour gray zone.
2. 2
   Diagnosis. Our technician arrives in uniform, walks the gate, opens the control housing, and identifies the fault. Most FAAC diagnostics take 20 – 35 minutes. We use a multimeter and test the board outputs, not guesswork.
3. 3
   Parts decision, written down. We tell you whether the fix calls for an OEM FAAC part or a quality aftermarket equivalent, and why. We’ll quote both options when both exist, and the price you approve is the price on the invoice, full stop.
4. 4
   The repair. We complete the job on the spot in most cases. If a specific FAAC board or motor needs to be ordered, we’ll tell you the lead time before you approve anything.
5. 5
   Full-cycle test. We run the gate through at least ten open/close cycles, test the safety sensors and auto-reverse, and check that the force settings are within FAAC spec so a pet or child can’t get pinned.
6. 6
   Paperwork and the 365-Day Done Right Promise. Before we leave, you get a digital invoice you pay from a link, photos of the work, and a written guarantee. If that repair fails within 365 days, we return and fix it at no charge. That’s not a promise we hope to keep. It’s in writing.

What FAAC Electric Gate Repair Costs in Fort Lauderdale

Here are real numbers from the jobs we do weekly across Fort Lauderdale, so you know what to expect before you pick up the phone:

• Service call and diagnosis (applied toward repair): $65 – $95
• Limit switch replacement and calibration (FAAC 415, S800): $120 – $180
• Start capacitor replacement (C720, C721): $140 – $210
• Control board diagnosis and repair (corrosion, relay issues): $185 – $320
• Full control board replacement (new OEM FAAC board): $380 – $650
• Hydraulic seal kit and fluid service (FAAC 750, 760): $310 – $520
• Complete opener replacement (parts and labor, most FAAC residential models): $1,400 – $2,900

What moves the price: the age of the opener, whether the board is repairable or needs replacement, and parts availability for older FAAC lines. We never charge a fee to quote, and every price is agreed in writing before a single bolt is turned. If the repair isn’t worth the cost, we’ll tell you that and show you a replacement option instead.

Call (754) 354-2542 for a free estimate on your FAAC gate.

Why Fort Lauderdale Homeowners Call Calder Gate Repair Fort Lauderdale for FAAC Work

We’re the dedicated gate repair team inside the Relay Home Co. family, founded in 2009 and independently owned, and we’ve spent years working on FAAC openers across this city. Nico Alvarez grew up in Los Angeles and trained in mechanical systems at Los Angeles Trade-Technical College before relocating to South Florida, and there isn’t much on a FAAC that he hasn’t opened up and diagnosed. His rule: “Tell me what it’s doing wrong, I’ll tell you what it costs to fix it, in writing, before we start.” That’s not a tagline. That’s how every call ends.

Beyond FAAC, our techs are trained on LiftMaster, Mighty Mule, Ghost Controls, and DoorKing, so if your property has a mixed gate setup, one call handles it. Every job carries our 365-Day Done Right Promise in writing, a free second visit if the repair fails, and a background-checked technician who shows up when we said he would. Calls are answered by a living person every hour of every day. Most Fort Lauderdale customers get same-day service when they call before noon.

FAQs