Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGhost Controls Gate Repair in Pompano Beach, FL | Calder Gate Repair Fort Lauderdale
We provide independent Ghost Controls Electric Gate Repair - Pompano Beach across the city, from the canal-front estates off NE 28th Avenue to the barrier island properties that get hit with salt spray from both the ocean and the Intracoastal. What makes our Ghost Controls work here different is simple: we know which parts fail first in salt air, and we seal against it during the repair rather than just swapping the broken piece. Call (754) 354-2542 for a free estimate.
We’re not factory-authorized, and that’s fine by us. We stock Ghost Controls actuators, control boards, and receiver modules on our trucks so most Pompano Beach repairs finish in one visit, without waiting on a middleman or a manufacturer’s parts queue.
Why Pompano Beach Residents Choose Us for Ghost Controls Service
Nico Alvarez started with a wrench in a Los Angeles trade program and has spent over a decade diagnosing gate openers. He’s the kind of technician who tells you what’s wrong in plain language, then puts the price in writing before a single bolt turns. That matters when your Ghost Controls system has been eating itself alive in salt air and you want to know exactly what the fix will cost.
Our crew is factory-familiar with Ghost Controls AXS, TSS, SLG, and Viper lines. We understand the circuit boards, the actuator arms, the limit switch logic, and the failure patterns that show up specifically on Pompano Beach properties. We also carry OEM-compatible and high-quality aftermarket parts locally, which means less waiting and more one-visit repairs. Every tech is background-checked, uniformed, and arrives with a live trackable arrival time, not a four-hour window.
Styles & brands we work with
Common Ghost Controls Gate Repair Problems We Solve in Pompano Beach
- AXS actuator arm limit switch failures. Salt spray corrodes the micro-switch contacts inside the arm, so the gate stops mid-travel or drifts past its stop point. We open the arm, replace the switches with sealed equivalents, and pack the connectors with dielectric grease so the repair holds longer than the factory part did.
- TSS control board relay failures from summer surges. A thunderstorm power surge welds the 12V relay shut, and the gate runs continuously or refuses to move at all. We test the relay, replace the board when needed, and recommend surge protection sized for Pompano Beach’s storm frequency.
- Viper remote receiver range drop. Humidity and salt film coat the antenna trace and unsealed receiver box, killing range until you’re standing at the keypad. We clean, seal, and reposition the receiver, and replace it if the board is too far gone.
- SLG slide motor gearbox seal failure. Fine sand from beach-side driveways gets past a dried-out seal and chews up the bronze worm gear. You’ll hear grinding under load. We replace the seal and gear, or the whole gearbox if the damage has spread.
- Battery backup not holding charge. Hurricane season exposes weak backup batteries fast. If your Ghost Controls opener won’t hold a charge or beeps constantly, we test the battery, the charging circuit, and the inverter, then replace what’s actually failed.
Ghost Controls Service in Pompano Beach: What Local Conditions Mean for Your Equipment
The barrier island is the harshest environment in Broward County for gate automation, and it’s not close. A Ghost Controls actuator that lasts five years in Coral Springs often quits in two here, because the equipment gets salt spray from the ocean on one side and the Intracoastal Waterway on the other. The result is that every exposed terminal, limit switch contact, and unsealed connector becomes a corrosion time bomb.
What this means for Ghost Controls owners is specific: on NE 28th Avenue just off the canal, our tech found a Ghost Controls TSS1 swing gate opener that would start and stop every six inches. The factory limit switch spade terminals had turned green from salt air and the switch body was full of white corrosion. We pulled the arm, replaced both limit switches with sealed equivalents, packed the connector with dielectric grease, and re-set the close limit to keep the gate from slamming into the salt-rotted post.
That’s the difference between a parts-swapper and a technician who understands Pompano Beach. We treat every Ghost Controls repair here as a corrosion-prevention job, not just a component swap. The dielectric grease, the sealed connectors, the stainless fasteners, they’re not upsells. They’re the repair.
Ghost Controls Models & Products We Service in Pompano Beach
We service the full Ghost Controls residential lineup: AXS Series (AXS1, AXS2), TSS Series (TSS1, TSS2), SLG Series (SLG1, SLG2), and the Viper Series. We also handle Ghost Controls accessories like keypads, remote receivers, battery backup modules, and safety edge sensors.
On parts, our approach is practical. We install new-old-stock and high-quality aftermarket Ghost Controls actuators, boards, and accessories that match or exceed original specs. We also swap in stainless hinge pins, bushings, and hardware where factory zinc plating fails in salt air. If an AXS arm or TSS board has two or more failed sub-components, we price a complete arm or board replacement rather than rebuilding it, because in Pompano Beach the next salt-spray failure is always closer than inland owners expect. For more on our brand coverage, see our Ghost Controls sales & service page.
See the difference
Before
After
Before
After
Before
AfterGhost Controls Service Pricing in Pompano Beach
Most Ghost Controls gate opener repairs in Pompano Beach run $185 to $340 before parts. A limit switch replacement on an AXS arm typically falls at the lower end, while a TSS control board replacement lands at the higher end. Full actuator arm replacements run $350 to $675 depending on the model and whether we’re installing a sealed, corrosion-resistant upgrade.
What drives cost: the specific component that failed, whether we’re rebuilding or replacing it, and how much corrosion repair the surrounding hardware needs. Every estimate is free and in writing before any work starts. The number on the invoice is the number you agreed to at the door. Call (754) 354-2542 for an exact quote on your Ghost Controls system.
Serving Pompano Beach, FL - Our Local Coverage Area
We’re based in the Pompano Beach area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs – Ghost Controls Gate Repair in Pompano Beach
Power surges from summer thunderstorms damage the TSS control board relay first. The 12V relay welds shut or burns contacts, and the gate either runs constantly or won’t start. We also see capacitor failures from repeated brownouts. The fix is replacing the board and adding surge protection rated for Pompano Beach’s storm frequency. Call (754) 354-2542 for a free diagnostic.
Yes. We swap zinc-plated hinge pins, bushings, and hardware for stainless steel equivalents with the same dimensions and finish profile. The gate looks the same from the street, but the hardware won’t rust out in two seasons of canal-front humidity.
It’s usually the actuator’s limit switches. Salt spray corrodes the micro-switch contacts inside the arm, and the gate loses its stop position. We open the arm, check the switches, and either clean and seal them or replace them with sealed equivalents. If the board is also failing, we catch that during the same visit.
Look for a battery module mounted near the control box, typically a sealed lead-acid or lithium pack in a separate housing. In Pompano Beach, battery backup matters because hurricane season brings multi-hour outages, and a gate that won’t open when the power’s out strands cars and creates a security liability. We test backup batteries as part of every Ghost Controls service call.
That’s usually the receiver, not the remote. Salt film and humidity coat the antenna trace and the inside of an unsealed receiver box, killing range. We clean, seal, and reposition the receiver, or replace it if the board’s corroded. Call (754) 354-2542 and Nico’s team will diagnose it over the phone first.
Service Areas Near Pompano Beach
We cover Pompano Beach and the surrounding areas, including Fort Lauderdale, Sunrise, Margate, and Hallandale Beach. If you’re in a neighboring city and need Ghost Controls-specific service, see our Pompano Beach service area page for full coverage details, or check Ghost Controls service in Sunrise or Ghost Controls service in Fort Lauderdale.
Book Your Ghost Controls Service in Pompano Beach Today
If your Ghost Controls opener is acting up, call (754) 354-2542. We’ll diagnose it over the phone, get you a written price, and dispatch a tech with the parts on the truck. Same-day service is available for most Pompano Beach repairs.
Written by Nico Alvarez, Owner at Calder Gate Repair Fort Lauderdale, serving Pompano Beach since 2009.