Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateMighty Mule Gate Repair in Sunrise, FL | Calder Gate Repair Fort Lauderdale
Gate Repair in Sunrise for Mighty Mule openers typically runs $180 to $340 before parts, and most opener jobs are finished same-day. We’re Calder Gate Repair Fort Lauderdale, an independent Mighty Mule service provider, and the main difference with our work is that we know which FM and MM series failures repeat themselves in Sunrise’s older, storm-exposed neighborhoods. Call (754) 354-2542 for a written quote before anything gets taken apart.
Why Sunrise Residents Choose Us for Mighty Mule Service
We’ve been working on Mighty Mule openers since the FM200 was still a current model, not a retrofit project. Nico Alvarez, who leads our crew, learned mechanical systems at Los Angeles Trade-Technical College before spending over a decade on gate repair across South Florida. Today his team handles Electric Gate Repair in Sunrise for Mighty Mule units all over the city, from the gated townhome loops in Springtree to the older Welleby subdivisions. We carry OEM Mighty Mule boards, remotes, and limit switches on the truck, plus a set of tested aftermarket replacements for parts the factory doesn’t make anymore. That parts stock means we’re usually able to diagnose and repair in one trip instead of scheduling a second visit. Our techs arrive in uniform, background-checked, with a live arrival time you can track from your phone, and the price goes in writing before a single bolt comes off. If the repair fails within 365 days, we come back at no charge under our 365-Day Done Right Promise.
Styles & brands we work with
Common Mighty Mule Gate Repair Problems We Solve in Sunrise
- Control board failure from lightning and power surges. Summer thunderstorms roll through Sunrise almost daily from June through September, and a nearby strike can fry a Mighty Mule control board instantly. We stock replacement boards for FM200, FM500, MM371W, and MM572W units, and we strongly recommend an inline surge protector on any Sunrise install.
- Corroded limit switch contacts and wiring harness connectors. Salt air from the Atlantic and the Everglades’ humidity combine to eat electrical connections faster here than inland. When a Mighty Mule gate stops halfway or reverses for no obvious reason, we check the limit switches and harness pins before touching anything else.
- Stripped plastic drive gears from wind load on double gates. Double swing gates catch a lot of wind in Sunrise’s afternoon storms. The Mighty Mule plastic gear that drives the arm can strip when the gate fights the opener. We check alignment and hinge wear at the same time, because a stiff hinge is usually what’s overloading the gear.
- Solar panel and battery degradation from UV and heat. We see Mighty Mule solar-powered units in Sunrise where the panel has clouded over from years of direct sun, and the battery won’t hold enough charge to open more than a few times. Replacing the panel and upgrading the battery is a straightforward fix, and we’ll test the whole charging circuit while we’re there.
- Remote range that shrinks to a few feet. Older Mighty Mule receivers in Sunrise often suffer from antenna corrosion or interference from nearby condo complex gate systems. Sometimes it’s the remote, sometimes it’s the receiver board, and we carry both so we can pin it down on the spot.
Mighty Mule Service in Sunrise: What Local Conditions Mean for Your Equipment
Sunrise’s Welleby community is the place where this matters most. A high concentration of 1980s-era Mighty Mule FM200 openers are still running there, and because the neighborhood has overhead power lines, lightning-induced surges hit control boards at a rate we don’t see in any other Sunrise subdivision. Our techs routinely retrofit Welleby FM200 units with inline surge protectors, and that single change has cut repeat board failures significantly. One of our techs just finished a job on NW 110th Ave in Welleby where a Mighty Mule FM200 had stopped responding after a storm. We found a fried control board from a nearby lightning strike and a seized gate hinge overloading the motor. New OEM board, new surge protector, realigned gate, and the opener wasn’t fighting itself anymore. That’s the pattern: in Sunrise, many Mighty Mule failures are environmental first and mechanical second. Fixing the symptom without addressing the surge exposure or the salt-air corrosion just means you’ll call us again in six months.
Mighty Mule Models & Products We Service in Sunrise
We service Mighty Mule FM200, FM500, MM371W, and MM572W openers, plus their accessories: keypads, remotes, receivers, battery backups, and solar panel kits. For FM and MM series units where the factory still makes parts, we use genuine Mighty Mule OEM components. When a model is obsolete and the OEM part is gone, we source tested aftermarket replacements that match the original electrical and mechanical specs, never just whatever fits. We stock the most common boards and remotes locally for fast Sunrise turnaround, and anything we have to order usually arrives within a few business days. All of our Mighty Mule repair work carries the same 365-Day Done Right Promise and a written price before the work starts.
See the difference
Before
After
Before
After
Before
AfterMighty Mule Service Pricing in Sunrise
Most Mighty Mule gate repair work in Sunrise lands between $180 and $340 before parts, depending on what’s actually failed. A limit switch replacement sits at the lower end. A control board replacement with surge protection runs higher, especially on FM200 units where we’re also correcting alignment or replacing a hinge. Parts are quoted separately and the total is always in writing before we begin. We don’t give a number over the phone and then change it at the door. The price you agree to is the price on the invoice. If you want to know exactly what your Mighty Mule opener needs, call (754) 354-2542 for a free phone estimate, and we’ll give you a straight answer in minutes.
Serving Sunrise, FL - Our Local Coverage Area
We’re based in the Sunrise area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs – Mighty Mule Gate Repair in Sunrise
Sunrise’s frequent summer lightning and your older FM200’s minimal surge protection are usually the cause. The control board takes a voltage spike and dies. We replace the board and install an inline surge protector, which in Welleby specifically has stopped the repeat failures we used to see every storm season. Call (754) 354-2542 and we’ll get your FM200 board swapped and protected.
Yes. For FM200 units and other older Mighty Mule models, we use factory OEM parts when the manufacturer still supplies them, and tested aftermarket replacements that match original specs when they don’t. We keep the most-requested older boards and remotes on hand for Sunrise jobs, so often the part is already in the truck.
That’s typically a limit switch or connector problem, not a motor failure. Humidity and salt air in Sunrise corrode the limit switch contacts and the wiring harness connectors, so the opener doesn’t know the gate position and reverses as a safety response. We clean or replace the affected parts, and in most cases the opener works normally again the same visit.
Yes, we install and upgrade battery backup systems for Mighty Mule openers across Sunrise, so your gate keeps working during and after a storm when power drops. We also check the charging circuit and solar panel condition if you have that setup, since a battery backup only helps if it’s actually charging. Call (754) 354-2542 for a written quote on a backup install.
It’s often the receiver antenna or the remote itself. Corrosion on the antenna connection or interference from nearby condo gate systems in Sunrise can cut range down to a few feet. We test the remote and the receiver separately, so you don’t pay for a part you don’t need.
Service Areas Near Sunrise
Calder Gate Repair Fort Lauderdale provides Mighty Mule service throughout Sunrise and nearby areas, including Mighty Mule service in Fort Lauderdale, Mighty Mule service in Pompano Beach, plus Margate, Hallandale Beach, and Cooper City. If you’re just outside these areas, call us anyway, we’ll confirm whether we can get to you same-day. You can also check our Sunrise service area page for full coverage details.
Book Your Mighty Mule Service in Sunrise Today
If your Mighty Mule gate is misbehaving in Sunrise, call (754) 354-2542. A live person answers 24/7, we’ll schedule a trackable arrival time, and you’ll get a written price before we open a single panel. Nico and the crew will have it sorted. For more on our Mighty Mule expertise, see Mighty Mule sales & service.
Written by Nico Alvarez, Owner at Calder Gate Repair Fort Lauderdale, serving Sunrise since 2009.