Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateStyles & brands we work with
See the difference
Before
After
Before
After
Before
AfterHow Much Does Gate Installation Cost in Fort Lauderdale?
Gate installation in Fort Lauderdale typically runs between $1,800 and $7,500 for a standard residential driveway gate, with most homeowners paying around $3,400 for a mid-range steel or aluminum gate with an opener. On the low end, a basic single-swing aluminum pedestrian gate without automation lands near $900 to $1,400 installed. On the high end, custom wrought-iron double gates with a LiftMaster or FAAC opener, intercom, and keypad access can reach $12,000 or more.
Your actual number depends on the gate material, size, opener type, and whether you’re replacing an existing gate or starting from scratch with new posts and concrete work. Calder Gate Repair Fort Lauderdale gives every customer a written price before any work starts, so the number we quote is the number you pay.
Gate Installation Cost Breakdown (2026)
Here’s what gate installation costs look like in Fort Lauderdale right now. These ranges reflect local material pricing, labor rates, and the specific demands of South Florida’s coastal climate, which we’ll address in a moment.
| Line Item | Typical Cost Range | Notes |
|---|---|---|
| Pedestrian gate (aluminum or steel) | $700 – $1,600 | Installed, no opener |
| Single driveway gate (aluminum) | $1,200 – $2,800 | Installed, no opener |
| Single driveway gate (wrought iron or steel) | $2,000 – $4,500 | Installed, no opener |
| Double driveway gate (aluminum) | $2,400 – $4,800 | Installed, no opener |
| Double driveway gate (wrought iron or steel) | $3,800 – $8,000 | Installed, no opener |
| Gate opener (swing, residential) | $600 – $1,800 | Includes arm, motor, and basic controls |
| Gate opener (sliding, residential) | $900 – $2,400 | Includes track, motor, and basic controls |
| Premium opener (LiftMaster, FAAC, BFT) | $1,200 – $3,200 | Includes battery backup and advanced controls |
| Concrete work (posts, footers) | $400 – $1,600 | Depends on post count and soil conditions |
| Electrical run (from panel to gate) | $300 – $1,200 | Varies by distance and conduit requirements |
| Intercom / keypad / video system | $400 – $2,000 | Basic keypad to full video intercom |
| Permit fees (city of Fort Lauderdale) | $100 – $300 | Varies by project scope |
Now, let’s talk about what pushes these numbers up or down. The biggest single variable is material. Aluminum is lighter, won’t rust, and costs less than wrought iron or steel, but it dents more easily if something hits it. Wrought iron is the premium choice in neighborhoods like Victoria Park and Rio Vista, where HOA architectural guidelines often require it. Steel sits in the middle: strong, paintable, and more affordable than wrought iron, but it demands regular maintenance in our salt air or it will corrode.
The second biggest variable is automation. A gate without an opener is just a fence with hinges. Adding a LiftMaster or FAAC swing opener means the cost jumps by $600 to $2,000 depending on whether you need a battery backup for hurricanes, solar power, or a heavier-duty motor for a bigger gate. Calder’s technicians are factory-familiar with nine major brands: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. If you already have an opener brand you trust, we install the gate to match it.
What Affects Gate Installation Pricing in Fort Lauderdale
Fort Lauderdale isn’t like installing a gate in Orlando or even Miami. Our coastal environment, building codes, and neighborhood-specific realities shape what you’ll pay. Here’s what moves the number:
- Salt air and corrosion resistance. Fort Lauderdale sits on the Atlantic, and salt spray from the Intracoastal reaches well inland. We regularly see steel gates in neighborhoods east of Federal Highway (think Coral Ridge, Oakland Park’s coastal edge, and the Las Olas Isles) showing rust within three to five years. Aluminum or properly powder-coated steel costs more up front but lasts decades longer. Budget $300 to $800 extra for marine-grade finishes if you live within a mile of the ocean.
- Hurricane wind-load requirements. Miami-Dade County product approvals are the gold standard for high-velocity hurricane zones, and Broward County enforces similar standards. Gates installed in Fort Lauderdale need to withstand sustained winds and wind-driven debris. That means stronger posts, deeper concrete footers, and often stronger hinges and brackets. It’s not uncommon for a gate that would cost $2,500 in Orlando to run $3,200 here because of wind-load engineering.
- Post and concrete condition. If you’re replacing an existing gate, we check the posts first. In older Fort Lauderdale neighborhoods like Shady Banks or Sailboat Bend, posts may be undersized, rusted at the base, or set too shallow. Replacing posts runs $200 to $500 per post with new concrete. Some jobs don’t need it. Some do. We’ll tell you before we touch anything.
- Gate size and weight. A 10-foot single driveway gate costs less than a 16-foot double gate. Longer gates need heavier framing, stronger hinges, and sometimes a more powerful opener. Every extra foot of width adds roughly $80 to $200 in materials and fabrication.
- Opener type and power requirements. Sliding gates cost more than swing gates to automate because of the track, chain, and motor configuration. If you want a sliding gate on a property with limited driveway depth, expect to pay $1,000 to $2,000 more than an equivalent swing gate setup. We install both, and we’ll help you figure out which actually fits your driveway.
- Access control features. A basic garage-door-style remote runs $75 to $150 per remote and works fine for some people. Most Fort Lauderdale homeowners want a keypad ($150 to $400), a telephone-entry or intercom system ($400 to $1,500), or a smartphone-controlled opener that pairs with an app ($200 to $600 beyond the opener itself). Each feature adds cost but also convenience and security.
How to Save on Gate Installation
You don’t need to compromise safety or quality to keep your gate installation budget reasonable. Here’s what actually works:
- Match the gate to the opener, not the other way around. If you already own a Mighty Mule or Ghost Controls opener, don’t swap it out. Calder installs gates around your existing hardware when it makes sense, and that alone can save $600 to $1,200 in new opener costs.
- Choose aluminum for coastal areas. Yes, it may cost more than basic steel up front. But in Fort Lauderdale’s salt air, an uncoated steel gate can need sandblasting and repainting within five years, which runs $400 to $900 per treatment. Aluminum costs more once. Steel costs more forever.
- Keep the existing posts if they’re sound. If your current gate posts are galvanized, correctly set in concrete, and bolt holes line up, we can mount the new gate on them and save you $400 to $1,000 on concrete and post work. We’ll check them at the free estimate.
- Phase your access controls. Start with the gate and opener now. Add the video intercom or smartphone app upgrade in six months. Each phase gets a separate written quote, so you’re never paying for something you don’t need yet.
- Get a written quote before anyone starts work. Calder’s no-hassle upfront pricing means the number on the invoice is the number we agreed to at the door. No change orders, no “while we were in there” surprises. Call (754) 354-2542 for a free estimate and we’ll give you the real number for your gate, your driveway, and your neighborhood.
How the Installation Process Works (Step-by-Step)
We’ve installed enough gates across Fort Lauderdale to know that homeowners want to understand the process before the first tool comes off the truck. Here’s what a typical installation looks like with Calder Gate Repair:
- On-site assessment. Nico Alvarez or one of our background-checked technicians walks your property, measures the driveway, checks post condition, and discusses material and automation options with you. This is also when we talk about wind-load requirements for your specific location.
- Written quote. Before any work starts, you get a written price that covers materials, labor, opener, concrete work if needed, and any permit fees. This number doesn’t change at the door.
- Permit application. Fort Lauderdale requires permits for most driveway gate installations, especially automated ones. We handle the paperwork and coordinate with the city. Permit fees run $100 to $300 depending on scope.
- Post and concrete installation. We set new posts to hurricane-grade depth, which in Broward County typically means at least 36 to 42 inches with a concrete footer designed for the gate’s wind-load rating. If you’re replacing posts, this is the step where it happens.
- Gate fabrication and mounting. The gate arrives from our fabricator and we mount it, adjust hinges, and confirm it swings or slides true. We dial in the gate’s movement so it doesn’t sag or scrape.
- Opener and access control installation. We mount your opener, whether it’s a LiftMaster, FAAC, Linear, or another brand, then set travel limits and safety stops. This includes the limit switch, which is the small sensor that tells the gate when to stop opening or closing. We test it multiple times in each direction.
- Cleanup and walkthrough. We remove old gate sections and debris, walk you through the controls, program your remotes and keypads, and email your receipt and warranty documentation before we leave. You pay from a digital invoice, and your before-and-after photos are saved to your job file.
Every installation carries the 365-Day Done Right Promise: if the installation falls short within 365 days, we return at no charge. That’s a written guarantee on every job.
Gate Installation Cost by Neighborhood in Fort Lauderdale
Fort Lauderdale varies block by block, and gate costs shift with the neighborhood. Here’s what we typically see across the city:
- Rio Vista and Victoria Park: Historic homes, HOA strictness, and a preference for wrought iron or decorative aluminum. Most gate installations run $4,000 to $9,000, with automation and access controls often mandated by the architecture.
- Coral Ridge and Imperial Point: Single-family homes on larger lots, often east of Federal Highway. Salt-air exposure demands powder coating or aluminum. Budget $3,000 to $6,500 for a solid single or double gate.
- Las Olas Isles and Harbor Beach: High-end properties near the water. Custom designs, video intercoms, and heavy-duty openers are the norm. $5,000 to $12,000 is common, and some go higher for custom ironwork.
- Shady Banks and Sailboat Bend: Older, tree-lined neighborhoods with smaller driveways and older posts. Many of these homes just need a pedestrian gate and fence repair. $900 to $2,800 covers most jobs.
- West Fort Lauderdale (Sunrise, Plantation border): Newer construction, wider driveways, and more room for sliding gates. $2,800 to $6,000 covers most installations out here.
Wherever you are in Fort Lauderdale, we dispatch a live, trackable arrival time, not a four-hour window. You’ll know who’s coming, when they’ll arrive, and exactly what the job costs before a single bolt is turned. That’s the Relay Standard we operate under as part of the Relay Home Co. family, established 2009. Calder Gate Repair is independently owned and operated within that network.
FAQs – Gate Installation Cost
How much does a gate opener repair cost in Fort Lauderdale?
Most gate opener repairs in Fort Lauderdale run between $185 and $520 before parts. A limit switch replacement, which is the small sensor that tells the gate when to stop, typically lands around $200 including labor. A control board replacement on a LiftMaster or FAAC unit can push past $600 with the part included. If a repair fails within 365 days, Calder returns at no charge under the 365-Day Done Right Promise. Call (754) 354-2542 for an exact quote, estimates are free.
Is it cheaper to repair or replace a gate in Fort Lauderdale?
If the gate posts are sound and the frame isn’t rusted through, repair is almost always cheaper: $150 to $700 for hinge replacements, weld repairs, or sag correction. If the gate is rusted at the base, the posts are failing, or the frame is bent, replacement makes more financial sense, and that runs $1,800 to $7,500 for most residential gates. We’ll measure the actual condition at the free estimate and give you both numbers in writing.
How much does a driveway gate cost in Fort Lauderdale without an opener?
A basic single aluminum driveway gate without automation runs $1,200 to $2,800 installed in Fort Lauderdale. Double gates run $2,400 to $8,000 depending on material and width. Wrought iron costs more than aluminum, and gates east of Federal Highway should have marine-grade finishes that add $300 to $800 to the base price.
Can you install a gate opener on an existing gate?
Yes, and this is one of the most common jobs Calder does in Fort Lauderdale. Retrofitting an opener onto an existing gate runs $600 to $2,400 depending on the opener brand (LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, or Mighty Mule) and whether the gate needs reinforcement or new brackets. We check the gate’s weight and swing arc before quoting, and the written price covers the retrofit from start to finish.
Do I need a permit to install a gate in Fort Lauderdale?
In most cases, yes. The city of Fort Lauderdale requires permits for automated driveway gates and for gate installations that include new concrete footers or electrical work. Permit fees run $100 to $300 for typical residential projects. Calder handles the permit application and city coordination as part of your installation, and the permit cost is included in your written quote.
How long does gate installation take in Fort Lauderdale?
A standard single-gate installation with an opener takes one to two days from start to finish. Double gates, custom ironwork, or jobs that need new concrete and electrical runs can take three to five days. Permits add lead time before work starts, usually one to two weeks depending on the city’s review queue. When you book with Calder, you get a live arrival time for every visit, so you’re not waiting through a vague four-hour window.
Get a Free Gate Installation Estimate in Fort Lauderdale
You deserve a real number, not a range you found online. Every gate, driveway, and opener setup is different, and Fort Lauderdale’s coastal code requirements mean your specific street and wind zone matter to the final price.
Calder Gate Repair Fort Lauderdale offers free estimates for gate installation, electric gate repair, and gate opener repair. We answer every call with a live person, 24 hours a day, 7 days a week. No voicemail, no chat bot. You’ll get a written price before any work starts, a written guarantee on every job, and a free return visit if something fails within 365 days. That’s how we work.
Call (754) 354-2542 to schedule your free estimate, or learn more about our Gate Installation in Fort Lauderdale services. If you’re just researching, start with our home page to see the full scope of what Calder covers.
Written by Nico Alvarez, Owner at Calder Gate Repair Fort Lauderdale, serving Fort Lauderdale since 2009.
Pricing reflects the Fort Lauderdale market as of 2026. Calder Gate Repair Fort Lauderdale offers free estimates – call (754) 354-2542.
What Our Customers Say
"Quote came in the app before the visit. No surprise at the end."
- Ginny L."Safety sensors realigned. Works fine. Photo eyes were dirty and out of line. Gate now stops when it should."
- Raul A."Slide gate wheels replaced. Glides smoothly now."
- Mark T.